Manual Techno line WS9612 (page 17 of 43) (English, German, French)

800396

Zoom out

Zoom in

1/43

EN3

Initial operation

 Open the Weather Station battery compartment cover

 Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]

 When you insert the batteries, all icon on the LCD will light up for 3 seconds, and you will

hear a beep tone, then detect indoor temperature & humidity.

 The Weather Station will now start to make a connection to the outdoor remote sensor.

This operation takes about 3 minutes and will displayed by a flashing reception RF

antenna symbol in the “OUTDOOR” display area on the receiver.

 This now, Open the remote sensor battery compartment cover, Insert 2 x AA batteries

observing polarity [ “+” and “–“ marks]

 After receiver has created a connection to the outdoor remote sensor, After 3 minutes it

will enter the DCF Radio control time receive mode.

Reception of the Radio signal

 The weather station will enter DCF77 signal reception after receiving outdoor temperature

or 3 minutes after start up.

 At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure

with the DCF signal to correct any deviations to the exact time. If this synchronization

attempt is unsuccessful (the radio mast icon disappears from the display), the system will

automatically attempt another synchronization at the next full one hour. This procedure is

repeated automatically up to total 5 times.

 To start manual DCF signal reception, press and hold the “Wave” buttonB3 for 2 seconds.

If no signals received within 7 minutes, then the DCF signal search stops (the radio mast

icon disappears) and start again at the next full one hour.

 During DCF77 reception, to stop searching radio signal, press the “Wave” buttonB3 once.

Notes:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received

successfully

 We recommend a minimum distance of 2.5 meters (8.2Feet) to all sources of interference,

such as televisions or computer monitors or switching power adapter.

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In

such extreme circumstances, place the system close to the window.

 During the RC receive mode, only the "Light" B5 and “Wave”B3 buttons have a

function, other buttons are not functional. If you want to use all functions, please press

“Wave” button to exit the DCF77 reception.

Manual time setting

 In normal mode, press SET button to switch display date/ alarm time/ second.

 IN date or second mode, press and hold the SET button for 3 seconds, into the setting

mode, the set item will blink disp lay. Press “+” or “-” buttons to adjustment the value,

Press SET button to confirm the item has been set and go to the next one, the sequence

of setting items is as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9612 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS9612 Manual

Product: