801362
17
Zoom out
Zoom in
Previous page
1/101
Next page
EN4
Sensor signal receiving mode
The main unit automatically starts receiving transmission from outdoor
sensor for outdoor temperature & humidity.
The outdoor sensor will automatically transmit temperature and
humidity signal to the main unit after batteries inserted.
If main unit failed to receive transmission from outdoor thermo sensor
in first 3 minutes after the batteries inserted (“- - . display on the
LCD), hold the “SENDER” button for 3 seconds to receive transmission
manually. Signal strength icon “ flashes on the LCD.
Notes:
For best measuring, place the outdoor sensor outside and protected
from rainfall, strong winds and direct sunlight.
Transmissions between receiver (station) and transmitter (sensor) can
reach up to 100 m in an open area. In open areas there are no
interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.
When powering or resetting, the device goes into radio reception mode
for 3 minutes. The signal strength icon is displayed on LCD.
Outdoor sensor channels
Press the “SENDER” button to view the outdoor sensor channel 1, 2 or
3 on the display. “1”, “2” or “3” will be displayed under signal strength
” accordingly.
Only one sensor can be connected to each channel at a time.
To connect a sensor to a certain channel, select the channel 1, 2 or 3
on the channel switch on the backside of the outdoor sensor before
starting it. Select the corresponding channel on the station and hold
the “SENDER” button for 3 seconds to receive transmission manually.
Radio controlled time & time signal receiving mode
3 minutes after batteries are inserted or station is reset and main unit
finishes receiving the transmission from outdoor sensor, the clock
automatically starts to scan for the DCF-77 time signal. The time signal
reception icon“ ” flashes on the LCD.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS9218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9218 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info