801429
6
Zoom out
Zoom in
Previous page
1/32
Next page
Press “ once to switch to alarm time display, it will back to normal when there is no key operation within 10 seconds.
Hold “ more than 2 seconds to enter the alarm setting mode.
While the alarm sounds, press “SNOOZE” and the alarm will ring again in 5 minutes.
4.2. Manual Setting mode
In normal display, hold the “SET” button for more than 2 seconds to enter manual setting mode.
The year digits flash on the LCD, press "+/C/F" or "-/wave" to adjust the year. Hold a button for more than 2 seconds to accelerate
this operation.
Press SET once and the month digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the month.
Press SET once and the date digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the date.
Press SET once and "00" is flashing on the LCD. Press "+/C/F" or "-/wave" to adjust the time zone.
Press SET once and "24 Hr" is flashing on the LCD. Press "+/C/F" or "-/wave" to choose between 12 Hr or 24 Hr time display.
Press SET once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the hour.
Press SET once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the minutes.
Press SET again or press no key pressed for approx. 20 seconds to exit the setting mode.
4.3. Alarm Setting mode
In normal mode, press the button once to display the alarm time, press “+/C/F” or -/wave” to activate or deactivate the alarm.
In normal mode or alarm time display mode, hold the button for more than 2 seconds to enter the alarm time setting mode.
Press once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm hour. Hold a button for more than
2 seconds to accelerate this operation.
Press once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm minutes.
Press again or press no key pressed for approx. 20 seconds to exit the setting mode.
5. WEATHER ICONS
The 7 weather forecast symbols: sunny, semi-sunny, cloudy, rainy, rainstorm, snow, heavy snow
6. ALARM FUNCTION
While alarm, the icon flashes,
While alarm, press SNOOZE to start 5 minutes snooze time, icons & icons are flashing.
Press other keys to stop the alarm
7. RF TEMPERATURE
The station will automatically receive start the outdoor sensor reception for 3 minutes.
Icon will be displayed.
In normal mode, hold “+/C/F” more than 2 seconds to start the outdoor sensor reception, previous received data will be cleared.
When in RF receiving mode, other keys are no function except “+/C/F” to exit.
When the outdoor sensor was not received, it will be displayed again when a new signal is received.
8. DCF-77 Reception
1. DCF-77 will be automatically received after start or reset.
2. Press“-/WAVE” for 2 seconds to start the reception.
3. Automatic receptionOn 1:00, 2:00 and 3:00. If the reception fails, it will continue at 4:00 and 5:00.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS9135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9135 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info