Manual Techno line WS8086 (page 8 of 39) (English, German, Dutch, French, Italian, Polish, Spanish)

801518

Zoom out

Zoom in

1/39

EN3

Setting time and sound sensor sensitivity (default time is at 0:00)

1. Press the SET button and the hour digit “0” flashes. Press + or - to set the hours. PM

indicator will be on to indicate afternoon time. There is no AM indicator.

2. Press the SET button and the minute digits “00” flash. Press + or - to set the minutes. Press

and hold + or - will accelerate setting at high speed.

3. Press the SET button and the time digits change to “24Hr” and flash. Press + or - to select

“24Hr” or “12Hr” time format. When 12Hr time format is selected,” PM” LED appears.

4. Press the SET button and “LO” flashes, press + or - to select “OFF”, “HI” or “LO” sensitivity

of the sound sensor.

5. Press the SET button to confirm and exit setting. The set time is displayed.

Note:

 Press and hold + or - will accelerate the setting process.

 The clock exits the set mode when no key is pressed for 10 seconds.

Using white light / mood light

At normal time display, face the clock up front at a distance of 1 meter. Clap your hands once to

turn on the white mood light. Clap again to turn on the color changing mood light. Clap once again

to stop the mood light at a particular color. Clap again to turn off the mood light.

Off -> white light -> mood light (changing color) -> mood light (fixed color) -> off

Selecting the “HI” sensitivity of the sound sensor in point 4 above will increase the distance to 2.5

to 3 meters but the clock will becomes very sensitive to sound and changes its color more

frequently.

To adjust the brightness of the display and white / mood light

Rotate the TIME brightness dial at the back side of the clock to set display brightness.

Rotate the MOOD LIGHT brightness dial at the back side of the clock to set mood light brightness.

Turn the selected dial upward for higher brightness or downward for lower brightness.

Trouble shooting

If your clock displays irrelevant time or does not function properly, which maybe caused by

electro-static discharge or other interference. Unplug the DC jack at the back of the unit, open the

battery cover and take out the batteries. Then re-plug the DC jack and reinstall batteries by

observing the correct +/- polarity. Your unit will be reset to default settings and you need to set it

again.

Specifications

Default settings:-

Time 0:00, 24HR format

Sound sensor sensitivity LO

Care of the product

1. Place your unit on a stable surface, away from sources of direct sunlight or excessive heat or

moisture.

2. Protect your furniture when placing your units on a natural wood and lacquered finish by

using a cloth or protective material between it and the furniture.

3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents

such as Benzine, thinner or similar materials can damage the surface of the unit. Make sure

the unit is unplugged before cleaning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8086 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS8086 Manual

Product: