801515
7
Zoom out
Zoom in
Previous page
1/40
Next page
EN2
Part B Buttons
B1: “ALARM SET” button B4: “▲/AL 1-2 ON/OFF” button
B2: “SNOOZE “button B5: “RESET” button
B3: “TIME SET” button B6: “▼/AL 3-4 ON/OFF/ ”button
Part C Structure
C1: Hanging hole C3: Battery compartment cover
C2: Stand
Getting started:
Open the battery compartment cover
Insert 3 x AA size batteries(not included) while observing correct polarity [“ +” and “ –“ marks]
Replace the battery compartment cover
The unit can be placed onto any flat surface by stand; or wall mounted by the hanging hole at
the back of the unit.
Time and alarm setting
Radio-controlled time:
After batteries inserted, the clock automatically starts to scan the DCF time signal. Radio
Control Icon“ ” flashes on the LCD.
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
The clock automatically receives the time signal at 2.00am & 3.00 a.m. every day to maintain
accurate timing. If reception stops if no signal was received successfully (“ on LCD
disappear)
The clock can be set to scan the time signal manually by holding button (B6) for 3
seconds. Each reception takes about 5 minutes.
Stop scanning by holding the ” button (B6) for 3 seconds.
” shown on the LCD if it is in Daylight Saving Time Mode
Manual time setting:
In time display, hold the TIME SETbutton for around 2 seconds to enter to clock/calendar
setting mode.
Press “▲” or “▼” button to adjust the setting and press “TIME SET” button to confirm each
setting. Keep the “▼”or “▲”button pressed to accelerate the setting process and reach the
desired value more quickly.
The setting sequence is: 12/24 hour time format -> time zone -> hour -> minute -> second
->year -> month -> date -> temperature unit -> weekday language
8 languages can be selected as weekday, they are: German, English, French, Spanish,
Italian, Dutch, Danish and Russian
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS8038 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8038 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info