801527
14
Zoom out
Zoom in
Previous page
1/62
Next page
EN6
Press “ALARM” button can switch the display ALARM1 time or ALARM2 time, in the alarm1 or
alarm2 display mode, press the “UP” button to turn the alarm on or off.
The alarm 1 or alarm 2 turn on, the “ ” or “ icon is displayed, the alarm 1 or alarm 2
function is open, The repeat of alarm icon at the same time is also displayed.
The alarm 1 or alarm 2 turn off, the“ ” or “ ”icon disappears, the alarm 1 or alarm 2
function is close.
Notes:
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this
case the alarm will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the
alarm signal is heard.
Stop the alarm signal
During the alarm sound, press any button to stop the alarm.
Snooze function:
When the time is up to the alarm, touch SNOOZE”, the alarm signal stops, and enter the
SNOOZE mode. After the snooze time is counted, the alarm will ring again.
In snooze mode, press any button buttons or touch “SNOOZE” and hold for more than 2
seconds to exit the snooze mode.
Notes:
When the snooze function is set to OFF, when the time is up to the alarm, touch the
SNOOZEcharacter position does not have this snooze function.
Temperature & Humidity Detection:
Temperature measuring range: -9.9°C (+14°F) ~ +50°C (+122°F), LL °C(°F) will displayed if
value lower than -9.9°C (+14°F), HH °C(°F) will displayed if value higher than +50°C (+122°F).
Humidity measuring range: 20%RH ~ 95%RH, 19%RH will displayed if value lower than
20%RH, 96%RH will displayed if value higher than 95%RH.
°C or °F temperature display
The temperature is displayed either in °C or °F. Briefly pressing the “°C/°F” button allows you
to switch between °C or °F.
Low battery:
When the low voltage icon “ ” is displayed, you need to replace the battery.
Trouble shooting
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, slide open the battery cover, take out the batteries and reinstall
them by observing the correct +/- polarity. Your unit will be reset to default settings and you need to
set it again.
Hereby, Technotrade declares that this product WS8016 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The
original EU declaration of conformity may be found at: www.technoline.de/doc/4029665080161
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless devices, the
reception is maybe affected by the following circumstances:
long transmitting distance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS8016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8016 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info