Manual Techno line WS8016 (page 11 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

801527

Zoom out

Zoom in

1/62

EN3

attempt another synchronization at the next full one hour. This procedure is repeated

automatically up to total 5 times.

 To manually start DCF signal reception, press the “WAVE” button once. If no signals received

within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start

again at the next full one hour.

 To stop searching radio signal, press the “WAVE” button once.

Notes:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received

successfully

 We recommend a minimum distance of 2.5 meters to all sources of interference, such as

televisions or computer monitors

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such

extreme circumstances, place the system close to the window.

 During the DCF radio receive mode, only the “WAVE” button function, other button

operation have no function, If you want to carry out other functions of operation, please press

“WAVE” button to exit the DCF radio receive mode.

Selecting RCC mode on/off:

 Hold the “WAVE” button until the beep tone sounds and “RCC OFF” is shortly displayed on the

LCD. The clock is now no longer using radio-controlled function.

 Hold the “WAVE” button again until the beep tone sounds and “RCC ON” is shortly displayed

on the LCD. The clock is using radio-controlled function again.

12-hour or 24-hour time display setting:

 Press the “DOWN” button to change the time displayed in 12-hour or 24-hour display.

Manual time setting:

 Press and hold down the “SET” button for 2 seconds, the button BEEP sound settings: ON or

OFF is displayed. Press the “UP” or “DOWN” button to set BEEP in ON or OFF.

 Press “SET” to confirm your setting, the time zone starts to flash. Press the “UP” or “DOWN”

button to set a correct time zone (-2 to +2). For example, select "0" for Germany or "-1" for the

United Kingdom.

 Press “SET” to confirm your setting, the hour display starts to flash. Press the “UP” or “DOWN”

button to set the correct hour.

 Press “SET” to confirm your setting, the minute displays starts to flash. Press the “UP” or

“DOWN” button to set the correct minute.

 Press “SET” to confirm your setting, the year display 2018 starts to flash. Press the “UP” or

“DOWN” button to set the correct year.

 Press “SET” button to confirm your setting, the month display starts to flash. Press the “UP” or

“DOWN” button to set the correct month.

 Press “SET” button to confirm your setting, the date display starts to flash. Press the “UP” or

“DOWN” button to set the correct date.

 Press “SET” button to confirm your setting, the language selection starts to flash. Press the

“UP” or “DOWN” button to select a language.

 Press “SET” to confirm your setting and to end the setting procedures, enter the clock mode.

Notes:

 After 20 seconds without pressing any button, the clock switches automatically from set mode

to normal time mode.

 The value of seconds is automatically reset to 00 if the value of minutes is changed.

 In the set time, you can hold the “UP” and “DOWN” button to quickly change the setting of the

value

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8016 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS8016 Manual

Product: