801526

Techno line WS8015 Manual

7
Zoom out
Zoom in
Previous page
1/46
Next page
GB 2
Alarm time mode
1. Alarm time
2. Alarm icon/Alarm on
3. Alarm mode indicator
GETTING STARTED
● Remove the battery door.
● Insert 4 new AA size batteries according to the “+/-” polarity mark on the battery
compartment.
● Replace the battery door.
● Once the batteries are inserted, full segment of the LCD will be shown before entering the
radio controlled time reception mode.
● The RC clock will automatically start scanning for the radio controlled time signal in 8
seconds.
Note: If no display appears on the LCD after inserting the batteries, press the [RESET]
button by using a metal wire. In some cases, you may not receive the signal immediately.
Due to the atmospheric disturbance, the best reception often occurs during nighttime.
DAYLIGHT SAVING TIME (DST)
The clock will automatically advance the time by one hour in the spring and back an hour in
the fall, provided that the DST function is not turned off. DST function is set to AUTO (On) by
default. The function can be disabled by manual settings.
RECEPTION OF RADIO CONTROLLED SIGNAL
This RC clock includes a built-in receiver which picks up the signal from the DCF station.
Therefore, the clock automatically sets the time, date and weekday.
● The clock automatically carries out four periodic synchronization procedures (at 2:00 AM,
8:00 AM, 2:00 PM and 8:00 PM daily) with the RC signal to correct any deviations to the
exact time.
● Once the unit synchronizes successfully to the RC signal, the signal icon “ ” will show
up. Each synchronization process will take between 6 to 16 minutes.
● To manually start or stop the RC signal reception, press [ RCC ] button.
Note: ● The strength of radio-controlled time signal from the transmitter tower may be
affected by geographical location or building around.
● Always place the unit away from interfering sources such as TV set, computer, etc.
● Avoid placing the unit on or next to metal plates.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS8015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8015 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info