801516

Techno line WS8014 Manual

7
Zoom out
Zoom in
Previous page
1/42
Next page
EN2
A5: Day
A6: Radio Controlled Icon
Part B – Back button
B1: “WAVE” button
B2: “SNOOZE” button
B3: “DOWN” button
B4: “UP” button
B5: “MODE” button
Initial operation
Open battery compartment cover
Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]
When you insert the batteries, all the icon on the LCD display will light up for 3 seconds, and you will
hear a beep tone and the station detects indoor temperature & humidity.
Then the station will enter the radio controlled time signal reception mode.
Reception of the DCF signal
The clock automatically starts the DCF (radio controlled time) signal search of any restart or changing
of new fresh batteries. The radio mast icon starts to flash.
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with the DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the
radio mast icon disappears from the display), the system will automatically attempt another
synchronization at the next full one hour. This procedure is repeated automatically up to total 5 times.
To start manual DCF signal reception, press and hold down the “WAVE” button for two seconds. If no
signals received within 7 minutes, then the DCF signal search stops (the radio mast icon disappears)
and start again at the next full one hour.
During DCF reception, to stop searching radio signal, press the “WAVE” button once.
Please note:
A flashing radio mast icon indicates that the DCF signal reception has started
A continuously displayed radio mast icon indicates that the DCF signal was received successfully
We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or
computer monitors
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
During the RC receive mode, only the SNZ" and "WAVE" button function, other buttons have no
function. If you want to use other functions, please press the “WAVE” button to exit the DCF reception
mode.
Manual time setting
Press and hold down the “MODE” button for 2 seconds, 12/24HR start to flash. Now use “+” and “-”
buttons to set the set 12 or 24 hour mode.
Press “MODE” button to confirm your setting, the time zone starts to flash. Now use “+” and “-” buttons
set a time zone (-12 to +12). For example for UK, the time zone is -01, for Germany it is 00.
Press “MODE” to confirm your setting, the Hour display starts to flash. Now use “+” and “-” buttons to
set the hour.
Press “MODE” to confirm your setting, the Minute display starts to flash. Now use “+” and “-” buttons to
set the minute.
Press “MODE” button to confirm your setting. The month and date icon display starts to flash. Now use
“+” and “-” buttons to set the date display to Month/Date or Date/Month format.
Press “MODE” button to confirm your setting. The year display 2015 starts to flash. Now use “+” and “-”
buttons to set the year.
Press “MODE” button to confirm your setting. The month display starts to flash. Now use “+” and “-”
buttons to set the month.
Press “MODE” button to confirm your setting. The Date display starts to flash. Now use “+” and “-”
buttons to set date.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS8014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS8014 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info