541940
7
Zoom out
Zoom in
Previous page
1/9
Next page
the unit’s hang hole (RTS 1) on a screw (screw not included).
Alternatively, the unit can be place on a flat horizontal surface.
2. The unit can be placed indoor or outdoor. The unit is weather proof.
Do not submerge unit in water. Do not expose unit to water for
prolonged periods. Avoid accumulation of water and or snow on unit.
Avoid exposing unit to direct sunlight. Remove unit from the exterior in
extreme or harsh weather, including but not limited to hurricane,
typhoon, and cyclones seasons. Do not place the unit in area of high
winds.
3. Do not place the remote temperature sensor more than 30 meters (98
feet) from the receiving weather station. The remote temperature
sensor is most effective if there are no obstruction and interference
between the remote temperature sensor and the weather station. The
remote temperature sensor might have to closer than 30 meters if the
weather station is not able to receive any signals. This is due to
obstructions and interference. The user might need to experiment with
various locations to get the best reception.
Configuring Weather Station to receive remote temperature signals.
1. Follow the above instructions to set up remote temperature sensor.
2. Press and hold “IN/CH” button (9) on weather station for 3 seconds.
‘CH’ will flash. This will reset all temperature memories.
3. The weather station will begin scanning for signals for channel 1. As
soon as signals are received for channel 1, the temperature will be
displayed. The weather station will automatically scans for the other
channels. It will scan each channel for approximately 3 seconds
before skipping to the next channel.
4. Once all your channels are received press “IN/CH” button (9) once to
confirm the channel. will no longer be displayed.
5. The weather station will receive a new signal automatically every 30
seconds to update the remote temperature.
6. Press “IN/CH” button (9) on weather station repeatedly to toggle
between channel 1 ‘CH1’, channel 2 ‘CH2’, and channel 3 ‘CH3’.
7. will be displayed if any of the remote temperature sensor’s
battery needs replacing.
Temperature memory
1. Press “Max / Min” button (8) to display maximum recorded
temperature, minimum recorded temperature, and current
temperature. “MAX” indicates maximum temperature. “MIN” indicates
minimum temperature.
2. Press and hold “Max / Min” button (8) for approximately 3 seconds to
reset the maximum and minimum temperature and humidity records.
Temperature display
1. The “IN” temperature displays the indoor temperature. It is the
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS6620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS6620 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS6620

Techno line WS6620 User Manual - German - 9 pages

Techno line WS6620 User Manual - Dutch, French, Italian, Polish, Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info