542287
4
Zoom out
Zoom in
Previous page
1/21
Next page
27
COST SAVING CALCULATION:
Once the save operation is activated the save will always be shown. When the RESET – DISPLAY – RESET
key is pressed, the cost saving function is activated. The current cost/month will be stored into storage and use
it as a reference value. All the displayed readings will be reset to 0. To calculate the new cost saving result,
press “LRN/SCAN” to receive new data from the Power Monitor, and then press “SAVE” to show the cost
saving in different displays (percent value, cost/month, cost/year). When a new cost/month is calculated then it
will be compared with the reference cost/month value in the storage. There are three cost saving displays
screens as follows:
1) In % save display, the display shows saved cost per month in percent value. If the current cost/month is
bigger than the reference cost/month, a negative percent value will be displayed.
2) In cost save per month display, the display shows the saved cost per month. If the current cost/month is
bigger than the reference cost/month, a negative value will be displayed.
3) In cost save per year display, the display shows the saved cost per year. If the current cost/month is
bigger than the reference cost/month, a negative value will be displayed. The cost/year is calculated by
12 x cost/month.
Note: Save operation will also be activated automatically by pressing and holding the LED button of power
monitor, the LED button flashes 3 times and then lights up to indicate the Power Monitor has been reset. When
the user releases the button, the LED light turns off. This operation not only will reset all the data to 0 of the
receiver, but also will reset all the data in the power monitor to 0. The cleared value is used as reference value
now.
IMPORTANT! Before the operations of cost monitoring, forecasting and cost saving calculation, the desired
power tariff must be set. (See “FUNCTION KEYS” – the “TARIFF key” section below.)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line Cost Control RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line Cost Control RC in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line Cost Control RC

Techno line Cost Control RC User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info