567997

Technisat TechniVision ISIO 55 Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
Manual
TechniVision ISIO 42 / 47 / 55
Connections
1 Common Interface
2 Network port
3 USB port
4 LNB Input (DVB-S)
5 Antenna input
(DVB-C, DVB-T, analogue)
6 Headphone output
(3.5mm jack plug)
7 Audio out analogue
8 Audio output digital
(S/P DIF electrical)
9 Scart connection
10 HDMI connection 1 (ARC)
11 HDMI connection 2
Display / Operation
12 IR receiver
13 LED
14 On/Stand-by
15 Volume -
16 Volume +
17 Programme -
18 Programme +
19 Mains power switch
* Optionally available TechniPlus ISIO Scart adapter (0000/3602) required.
Please fold out
1.
8:7: 9: 10 11
12 13 14 15 16 17 18
19
2:
3:
4:
5:
6:
TV connections / Local control
1 Illustrations
2
3
1 Illustrations
3
Sleep Timer
Sound on/off
Numeric keypad keys
Recording
EPG
Page up
Back
Options selection
Timer Audio channel
Teletext PaT
Freeze frame /
Jogshuttle
Genre
Programme +/-
Stop / DVR
Rewind
Arrow keys:
Function keys / off
Menu
Zoom / Format
Function selection
Volume +/-
OK
Info
Page down
WWW
0/AV (source selection)
TV/Radio mode
Remote control code
On/Standby
Pause / playback
Fast forward
4
2 Please read this first
Dear customer,
This quick start manual only describes the most important connection options and basic
operation steps to enable you to start using the TechniPlus ISIO quickly. It does not in any
way replace the full instruction manual for the TV.
There are many additional functions described in the full instruction manual that are not
covered in this quick start manual. There is also a great deal of additional information about
individual functions and settings in the full instruction manual, which provides a more detailed
explanation of the available options and the purpose of the settings and functions.
Please also ensure that you comply with the notes on safety provided under section 3 of
the instruction manual on safety, appropriate use, operation, power consumption in standby
mode and during operation as well as on transporting and cleaning the television. You will
also find information provided in this section about disposal of the packaging and of the
television. The manufacturer's declaration is also provided in this section.
2.1 Inserting/changing the batteries in the remote control
> Open the cover on the battery compartment at the rear of the remote control by pushing
it in the direction of the arrow and then lifting it off.
> Insert the supplied batteries, ensuring that the poles are the right way around (indicator
visible in battery compartment), then close the battery compartment again.
2.2 Setting the remote control code
> Hold down the remote control code button to switch over the remote control option
and press the OK button as often as necessary until the LED for the desired remote
control option (TV, SAT1 or SAT2) flashes briefly.
2.3 Legal notices
Subject to change for amendments and printing errors. Version 05/14 You can find the
current version of the manual in the download area of the TechniSat home page.
TechniVision ISIO 42, TechniVision ISIO 47, TechniVision ISIO 55 and TechniSat
are registered trademarks of TechniSat Digital GmbH, Postfach 560, 54541 Daun,
Germany, www.technisat.de.
2.4 Servicing notes
Warning: if you encounter a problem with this equipment, please contact our Technical
Hotline initially. You can reach this on Mon - Fri 8am to 8pm on +49 (0) 3925 9220
1800.
If the device needs to be sent to us for any reason, please send it to TechniSat
Teledigital AG, Service-Center, Nordstr.
The following references (a b c) refer to the connection example on page 5.
c d
b
a
TV/RADIO
BluRay / DVD
5
3 Connection
a Connecting the satellite antenna using the LNB input.
b Connecting the cable connection (digital and/or analogue) or the DVB-T antenna to
the antenna input on the television.
c Connecting the television to a BluRay/DVD player using an HDMI cable.
d Connecting the analogue or digital audio output to hi-fi stereo equipment or surround
sound equipment.
3. Satellite antenna
a Connect the LNB input on the TV to your external unit using a suitable coaxial cable.
To do this also observe points 8.1 and 10.5 of the instruction manual.
3.2 Antenna/cable connection (analogue and digital)
b Connect the antenna input for the LCD TV to either a
terrestrial antenna or to the connection socket for the cable or antenna
connection.
To receive DVB-T signals and DVB-C and analogue cable channels simultaneously,
use the TechniSat DVB C/T switch (part no. 0000/3263)
3.3 BluRay-/DVD-Player
c Connect your BluRay/DVD player using (for example) an HDMI connection cable with
an HDMI connection.
3.4 Surround sound/Hi-Fi amplifier
You can connect the LCD TV to a surround sound or hi-fi amplifier to obtain the best possible
sound quality.
3.4.1 Digital
d If your amplifier has an appropriate electrical input (S/P-DIF), connect the Audio out
digital socket to the input on your amplifier.
Depending on the broadcaster concerned, the stereo signal (PCM) and, where
broadcast, Dolby Digital signal (AC3) are available.
3.4.2 Analogue
d To do this, use a suitable cable to connect the cinch connectors for the analogue
audio output on the television to an input on your amplifier
(e.g. CD or AUX. Warning! The phono input is not suitable!).
3.5 Mains power connection
The television should only be connected to the mains power network (230V / 50Hz)
once it has been completely connected by cable to the associated components. This
will prevent damage to the TV or other components.
6
7
4 Basic operation
Dear Customer
The following section starts by covering basic operation as well as recurrent operating steps
for the TV. This should make it easier to read the instruction manual, since it avoids repeated
description of identical steps at each individual stage.
If it is necessary for a function or setting for the TV to be different from the basic operation,
the difference in operation is described in detail in the relevant section in the instruction
manual.
The so-called "On Screen Display" is used on your TV. This simplifies operation of the
television since the buttons on the remote control can assume different functions. This makes
it possible to reduce the number of buttons.
In this On Screen Display (OSD for short) the selected functions or settings are highlighted.
Furthermore, you will find a line along the lower edge of the screen in which the various
buttons on the remote control are shown with their current functions.
In this instruction manual the terms shown in the OSD as well as
the buttons to be pressed are highlighted from the rest of the text by the display format
used.
Warning - indicates an important note which you absolutely should observe in order to
avoid problems with the television, loss of data or unwanted operation.
Tip - indicates a note about the function being described, as well as other associated
functions that may need to be observed with reference to the respective place in the
instruction manual.
4.1 Switching the television on/off
> When the television is on standby, you can switch it on by pressing the
On/Standby button on the remote control/device.
> When operating normally you can switch the device to standby mode by pressing the
On/Standby button.
When switching the TV on/off, also observe section 7.1 in the instruction manual as
well as the instructions given under this point.
4.2 Calling up the main menu and navigating through the menus / functions
The following example will illustrate how you reach the main menu and call up a submenu.
The objective of the example is to call up the Picture settings menu.
> Press the Menu button. The main menu appears on the screen.
> Select the Settings menu item by moving the highlight over this item using the arrow
keys.
> Press the OK button to open the Settings menu.
8
36
7.2 DVR playback
You can gain access to your DVR recording using the DVR Navigator.
7.2.1 Calling up the DVR Navigator
The DVR Navigator can be called up in the following ways. Depending on whether you are in
TV or radio mode, a list appears with all the TV or radio recordings available on the attached
storage medium.
In doing so also be absolutely sure to observe section 10.8 in the instruction manual.
The broadcast information can be faded in and out through repeated pressing of the
Info button.
7.2.1.1 When in TV mode
> In TV mode press the Stop / DVR button to switch directly to the DVR Navigator.
or
> Open the channel lists navigator by pressing the OK button and switch to the DVR
Navigator by pressing the Stop/DVR button.
or
> In the function selection select the Films / DVR item.
> Now call up the My Recordings folder.
7.2.1.2 From playback of a running / existing DVR recording
> Press the OK button to open the DVR Navigator.
or
> In the function selection select the Films / DVR item.
> Now call up the My Recordings folder.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat TechniVision ISIO 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TechniVision ISIO 55 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat TechniVision ISIO 55

Technisat TechniVision ISIO 55 User Manual - German - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info