Manual Technisat TechniVision ISIO 55 (page 22 of 44) (English)

567997

Zoom out

Zoom in

1/44

Manual

TechniVision ISIO 42 / 47 / 55

Connections

1 Common Interface

2 Network port

3 USB port

4 LNB Input (DVB-S)

5 Antenna input

(DVB-C, DVB-T, analogue)

6 Headphone output

(3.5mm jack plug)

7 Audio out analogue

8 Audio output digital

(S/P DIF electrical)

9 Scart connection

10 HDMI connection 1 (ARC)

11 HDMI connection 2

Display / Operation

12 IR receiver

13 LED

14 On/Stand-by

15 Volume -

16 Volume +

17 Programme -

18 Programme +

19 Mains power switch

* Optionally available TechniPlus ISIO Scart adapter (0000/3602) required.

Please fold out

8:7: 9: 10 11

12 13 14 15 16 17 18

TV connections / Local control

1 Illustrations

Sleep Timer

Sound on/off

Numeric keypad keys

Recording

EPG

Page up

Back

Options selection

Timer Audio channel

Teletext PaT

Freeze frame /

Jogshuttle

Genre

Programme +/-

Stop / DVR

Rewind

Arrow keys:

Function keys / off

Zoom / Format

Function selection

Volume +/-

Info

Page down

WWW

0/AV (source selection)

TV/Radio mode

Remote control code

On/Standby

Pause / playback

Fast forward

2 Please read this first

Dear customer,

This quick start manual only describes the most important connection options and basic

operation steps to enable you to start using the TechniPlus ISIO quickly. It does not in any

way replace the full instruction manual for the TV.

There are many additional functions described in the full instruction manual that are not

covered in this quick start manual. There is also a great deal of additional information about

individual functions and settings in the full instruction manual, which provides a more detailed

explanation of the available options and the purpose of the settings and functions.

Please also ensure that you comply with the notes on safety provided under section 3 of

the instruction manual on safety, appropriate use, operation, power consumption in standby

mode and during operation as well as on transporting and cleaning the television. You will

also find information provided in this section about disposal of the packaging and of the

television. The manufacturer's declaration is also provided in this section.

2.1 Inserting/changing the batteries in the remote control

> Open the cover on the battery compartment at the rear of the remote control by pushing

it in the direction of the arrow and then lifting it off.

> Insert the supplied batteries, ensuring that the poles are the right way around (indicator

visible in battery compartment), then close the battery compartment again.

2.2 Setting the remote control code

> Hold down the remote control code button to switch over the remote control option

and press the OK button as often as necessary until the LED for the desired remote

control option (TV, SAT1 or SAT2) flashes briefly.

2.3 Legal notices

Subject to change for amendments and printing errors. Version 05/14 You can find the

current version of the manual in the download area of the TechniSat home page.

TechniVision ISIO 42, TechniVision ISIO 47, TechniVision ISIO 55 and TechniSat

are registered trademarks of TechniSat Digital GmbH, Postfach 560, 54541 Daun,

Germany, www.technisat.de.

2.4 Servicing notes

Warning: if you encounter a problem with this equipment, please contact our Technical

Hotline initially. You can reach this on Mon - Fri 8am to 8pm on +49 (0) 3925 9220

1800.

If the device needs to be sent to us for any reason, please send it to TechniSat

Teledigital AG, Service-Center, Nordstr.

The following references (a b c) refer to the connection example on page 5.

c d

TV/RADIO

BluRay / DVD

3 Connection

a Connecting the satellite antenna using the LNB input.

b Connecting the cable connection (digital and/or analogue) or the DVB-T antenna to

the antenna input on the television.

c Connecting the television to a BluRay/DVD player using an HDMI cable.

d Connecting the analogue or digital audio output to hi-fi stereo equipment or surround

sound equipment.

3. Satellite antenna

a Connect the LNB input on the TV to your external unit using a suitable coaxial cable.

To do this also observe points 8.1 and 10.5 of the instruction manual.

3.2 Antenna/cable connection (analogue and digital)

b Connect the antenna input for the LCD TV to either a

terrestrial antenna or to the connection socket for the cable or antenna

connection.

To receive DVB-T signals and DVB-C and analogue cable channels simultaneously,

use the TechniSat DVB C/T switch (part no. 0000/3263)

3.3 BluRay-/DVD-Player

c Connect your BluRay/DVD player using (for example) an HDMI connection cable with

an HDMI connection.

3.4 Surround sound/Hi-Fi amplifier

You can connect the LCD TV to a surround sound or hi-fi amplifier to obtain the best possible

sound quality.

3.4.1 Digital

d If your amplifier has an appropriate electrical input (S/P-DIF), connect the Audio out

digital socket to the input on your amplifier.

Depending on the broadcaster concerned, the stereo signal (PCM) and, where

broadcast, Dolby Digital signal (AC3) are available.

3.4.2 Analogue

d To do this, use a suitable cable to connect the cinch connectors for the analogue

audio output on the television to an input on your amplifier

(e.g. CD or AUX. Warning! The phono input is not suitable!).

3.5 Mains power connection

The television should only be connected to the mains power network (230V / 50Hz)

once it has been completely connected by cable to the associated components. This

will prevent damage to the TV or other components.

4 Basic operation

Dear Customer

The following section starts by covering basic operation as well as recurrent operating steps

for the TV. This should make it easier to read the instruction manual, since it avoids repeated

description of identical steps at each individual stage.

If it is necessary for a function or setting for the TV to be different from the basic operation,

the difference in operation is described in detail in the relevant section in the instruction

manual.

The so-called "On Screen Display" is used on your TV. This simplifies operation of the

television since the buttons on the remote control can assume different functions. This makes

it possible to reduce the number of buttons.

In this On Screen Display (OSD for short) the selected functions or settings are highlighted.

Furthermore, you will find a line along the lower edge of the screen in which the various

buttons on the remote control are shown with their current functions.

In this instruction manual the terms shown in the OSD as well as

the buttons to be pressed are highlighted from the rest of the text by the display format

used.

Warning - indicates an important note which you absolutely should observe in order to

avoid problems with the television, loss of data or unwanted operation.

Tip - indicates a note about the function being described, as well as other associated

functions that may need to be observed with reference to the respective place in the

instruction manual.

4.1 Switching the television on/off

> When the television is on standby, you can switch it on by pressing the

On/Standby button on the remote control/device.

> When operating normally you can switch the device to standby mode by pressing the

On/Standby button.

When switching the TV on/off, also observe section 7.1 in the instruction manual as

well as the instructions given under this point.

4.2 Calling up the main menu and navigating through the menus / functions

The following example will illustrate how you reach the main menu and call up a submenu.

The objective of the example is to call up the Picture settings menu.

> Press the Menu button. The main menu appears on the screen.

> Select the Settings menu item by moving the highlight over this item using the arrow

keys.

> Press the OK button to open the Settings menu.

> Use the up/down arrow keys to highlight the Picture settings item.

> The Picture settings menu is opened by then pressing the OK button.

You can also highlight the individual menu items in the same way as you highlight an

item on a submenu to open it and alter the respective settings.

The menu items in some menus have to be highlighted by moving sideways. This is

done by pressing the right/left arrow keys.

By pressing on the up/down arrow keys it is possible to move the highlighting from

line to line and to move upwards and downwards sideways using the page up/down

buttons.

You will see the so-called menu path in the uppermost line of the menu. This shows

you the menu you are currently in and the path you took to reach this menu. In the

example shown this is Main menu > Settings > Picture settings. The menu

path is also shown throughout the instruction manual and shows you how you can

reach the respective menu with the settings described.

If the blue function key with Help is displayed in the bottom line on the screen, a Help

page can be displayed by pressing this button and hidden by pressing it again.

4.3 Accepting settings / Exiting menus and functions

In some menus and functions the changes made must be accepted manually in order to save

them permanently. If this does not happen, the function or the values that existed before the

change was made will be reset automatically on exiting the menu.

If an Accept field or the green function key with Accept is displayed in the bottom

line of the screen, you can see that the changes made must be saved manually to be

accepted.

> By highlighting Accept using the right/left arrow keys and confirming with the

OK button or by pressing on the green function key (Accept), the changes are

saved and you return to the next menu level up.

Alternatively:

> Press the Return button.

A request appears asking whether the changes you made should be applied.

> Use the right/left arrow keys to highlight Yes or No and confirm your selection by

pressing the OK button.

Changes will now be saved or discarded according to your selection and you move

back to the next menu level up.

Alternatively:

> Press the Menu button to directly leave the menu.

The settings which need to be saved manually will be reset in this case.

If the green function key with Accept is not displayed in the bottom line of the

screen, the changes are saved automatically on exiting the menu.

4.4 Changing a setting

You can create settings using the arrow selection method, the selection list, by

entering numbers and by using the virtual keyboard. The television specifies the

method that can be used to change a highlighted setting. You can see this from the following

displayed symbols:

Arrow selection method (section 4.4.1)

Arrows are shown on the left or right edge of the highlight.

Selection list (section 4.4.2)

The symbol is shown on the right edge of the highlight.

Entering numbers (section 4.4.3)

Virtual keyboard (section 4.4.4)

The symbol is shown on the right edge of the highlight.

4.4.1 Arrow selection method

> If is shown on the left and on the right next to the set value, you can alter this using

the left/right arrow keys.

4.4.2 Selection list

If is shown on the right next to the set value, the value can be changed using the selection list.

> Press the OK button to open the selection list.

> Highlight the setting you want using the up/down arrow keys.

By pressing the up/down arrow keys it is possible to move the highlight from line

to line and to move upwards and downwards page by page using the page up/down

buttons.

> Confirm by pressing on the OK button. The selection list is closed again and the

selected setting is shown in the menu.

6 Operating the unit

6.1 Switching the TV on and off

6.1.1 Switching on using the mains power switch on the television

> Switch on the television by pressing in the mains power switch.

The TV now performs an initialisation and cannot be operated during this time. This

process takes several seconds to complete.

6.1.2 Switching on from standby mode

> Switch the TV on by pressing the On/Stand-by button on the remote control or on

the TV, or the Channel +/- keys on the remote control or on the TV, or a numeric key

between 0 and 9 on the remote control.

If the user-dependent parental control (TechniFamily) is activated under section 10.8 of

the instruction manual, the user selection now appears according to section 7.1.3 of the

instruction manual.

6.1.3 Switching off to standby mode

> Switch the TV off by pressing the On/Stand-by button.

When switching off the TV, please note that it checks whether a new operating software

version or channel list is available. This process takes several seconds to complete.

The LCD panel is already switched off during the test.

The device switches completely into standby mode after completion of the test. The

TV is now in standby mode and can be completely switched off using the mains power

switch.

6.1.4 Switching off using the mains power switch on the television

> The television is switched off completely by pressing the mains power switch.

The device notes the last switching status (“On” or “Off”) entered using the remote

control or the television buttons.

If a power failure occurs during operation, you should switch off the television using the

mains power switch so that it is not switched on again unintentionally as soon as the

power is available again.

You should only switch the television off from standby mode using the mains power

switch, to prevent damage to the database.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TechniVision ISIO 55 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat TechniVision ISIO 55

Technisat TechniVision ISIO 55 User Manual - German - 250 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technisat TechniVision ISIO 55 Manual

Product: