486574

Technisat TechniStar S2 Manual

32
Zoom out
Zoom in
Previous page
1/48
Next page
New search
Existing
search term
> Now press the green function key (Accept) to search for programmes with exactly
this title (the EPG data is searched for programmes with this title and these are
displayed where available).
7.14 Timer recordings
You can use the DVR timer to record programmes to an attached recording medium while
you are out. Your receiver is equipped with video recorder timers and channel-switching
timers. In terms of their programming, these timer types differ only in name. You can
programme the timers manually as described in this chapter, or use the EPG function.
1. DVR timer
This function is used to switch your digital receiver on and off for the selected programme,
to record it to the storage medium while you are out.
If the receiver is switched on by the DVR timer, this is indicated by "rEc" in the display.
Some of the remote control functions (e.g. calling up the main menu) are unavailable.
2. Video recorder timer
If the video recorder timer is selected, your digital receiver will be switched on and off for the
selected programme, allowing you to record programmes to an external recording unit while
you are out (e.g. a video recorder). If the device is switched on by the video recorder timer,
this will be indicated by the message “rEc” in the display. Certain remote control functions
will be unavailable. Please note that the corresponding recorder must also be programmed.
3. Channel switching timer
If your receiver is in normal operating mode, it will switch to the programmed channel at the
set time.
In contrast to using the DVR or video recorder timer option, the device remains fully
functional and will not be switched off at the end of the programme.
4. Alarm
If your receiver is in standby mode, it is switched on when the programmed channel is
reached at the set time. In contrast to using the DVR or video recorder timer option, the
device remains fully functional and will not be switched off at the end of the programme.
7.14.1 Timer settings (pre-roll time/post-roll time)
With EPG timer programming, the receiver receives the data for the selected programme
automatically via the EPG data. This means that the start and end times for the programme
to be recorded are transferred to the exact minute.
32
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat TechniStar S2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TechniStar S2 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat TechniStar S2

Technisat TechniStar S2 User Manual - German - 194 pages

Technisat TechniStar S2 Quick start guide - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info