Playing a record
Playing a record
Automatic start
Put on a record. If necessary, fit the spindle adapter
1 to play singles. Remove the stylus protector if
necessary.
Use the selector lever 7 to set the record size to 30
cm (12 inch) or 17 cm (7 inch) as appropriate.
Use the SPEED selector 4 to set the turntable speed
to 33 or 45 rpm.
Press the START 5 button. The turntable begins
turning at the set speed. The tone arm automatically
sets itself onto the record. Playback begins.
Manual start
Put on a record. If necessary, fit the spindle adapter
1 to play singles. Remove the stylus protector if
necessary.
Use the selector lever 7 to set the record size to 30
cm (12 inch) or 17 cm (7 inch) as appropriate.
Use the SPEED selector 4 to set the turntable speed
to 33 or 45 rpm.
Using the tone arm lift lever 12, raise the tone arm 9
to the UP position.
Take the tone arm from its support and swivel it over
the record's lead-in groove. The turntable begins
turning at the set speed. Using the tone arm lift lever
12, lower the tone arm 9 onto the record.
The tone arm lift lever 12 can be used to raise the
tone arm (lift lever in UP position) at any point –
including to briefly interrupt playback. The turntable
keeps turning.
Stop button
When the end of the record is reached, the tone arm
automatically returns to its support and the unit switches
off.
Note:
You can also switch off the record player by pressing the
STOP button 6. The tone arm is automatically returned to
the tone arm rest and the appliance switches off.
Alternatively: raise the lift lever 12 to the UP position and
move the tone arm back to the tone arm rest.
