Safety and setting up the record player
Setup
•
The record player must be set up only on a sturdy
horizontal, vibration-free surface.
•
Do not set up the unit in the vicinity of heat sources,
such as radiators. Avoid direct sunlight and excessively
dusty places.
•
You should only operate the unit when it is positioned
horizontally.
•
Do not place any heavy objects on the unit.
•
Not to be used in the open air.
•
Please note that the appliance feet may, under certain
circumstances, leave coloured marks on certain furniture
surfaces. Place something between the item of furniture
and the appliance to protect the surface.
•
Keep the unit away from devices that produce strong
magnet fields.
•
If you bring the record player from a cold into a warm
environment, moisture may form on the inside of the
unit. In this case, wait about an hour before you operate
it.
•
Lay the mains cable in such a way that no one can trip
over it.
•
Fully insert the mains plug into the socket.
•
Make sure the power cord or plug is always easily
accessible so that the unit can be disconnected quickly
from the power supply.
•
This socket should be as close to the unit as possible.
•
Avoid using multi-socket extensions.
•
Do not touch the mains plug with wet hands—risk of
electric shock!
•
In the event of malfunctions or smoke and odour coming
from the housing remove the mains plug from the socket
immediately!
•
Before a thunderstorm breaks, pull the mains plug.
•
If the unit is not going to be used for a prolonged period,
e.g. in the event of a long trip, remove the mains plug
from the socket.
•
Do not connect any other type of device to the USB
interface. The USB interface is only suitable for direct
connection to a PC.
Do not remove any covers.
