568011

Technisat TechniCorder ISIO STC Manual

20
Zoom out
Zoom in
Previous page
1/64
Next page
20
5.3 Accepting settings / Exiting menus and functions
In some menus and functions the changes made must be accepted manually in order to
save them permanently. If this does not happen, the function or the values that existed
before the change was made will be reset automatically on exiting the menu.
If an Accept field or the green function key with Accept is displayed in the bottom
line of the screen, you can see that the changes made must be saved manually to be
accepted.
> By highlighting Accept using the right/left arrow keys and confirming with the
OK button or by pressing the green function key Accept, the changes are saved
and you move back up to the next menu above.
Alternatively:
> Press the Return button.
A request appears asking whether the changes you made should be applied.
> Use the right/left arrow keys Ye s or No and confirm your selection by pressing
the OK button.
Changes will now be saved or discarded according to your selection and you move
back up to the next menu level above.
Alternatively:
> Press the Menu button to leave the menu directly.
Settings that need to be saved manually will be reset in this case..
If the green function key is not displayed on the bottom line of the screen with
Accept, the changes are saved automatically on exiting the menu.
5.4 Changing a setting
You can create settings using the arrow selection method, the selection list, by
entering numbers and by using the virtual keyboard. The unit specifies the method
that can be used to change a highlighted setting. You can see this from the following dis-
played symbols:
- Arrow selection method (section 5.4.1)
Arrows are shown on the left or right edge of the highlight.
- Selection list (section 5.4.2)
The symbol is shown on the right edge of the highlight.
- Entering numbers (section 5.4.3)
- Virtual keyboard(section 5.4.4)
The symbol is shown on the right edge of the highlight.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat TechniCorder ISIO STC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TechniCorder ISIO STC in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat TechniCorder ISIO STC

Technisat TechniCorder ISIO STC User Manual - German - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info