568011

Technisat TechniCorder ISIO STC Manual

14
Zoom out
Zoom in
Previous page
1/64
Next page
14
4.1 Mains power connection
The digital receiver should only be connected to the mains power supply once you have fin-
ished making all the connections to the various other components. This will prevent damage
to the digital receiver or other components.
a Once you have made all the other connections in accordance with the following sec-
tions, use the power cable supplied to connect the receiver to 230 V/50-60 Hz mains
power outlet.
4.2 External unit
4.2.1 Operating the receiver with 2-4 DVB-S antenna signals
To be able to use the full scope of DVB-S functions on the digital receiver you should oper-
ate the receiver on up to four separate DVB-S antenna signals/antenna cables that which
are set up identically.
If you have not installed an additional DVB-S tuner module:
b, c Connect LNB inputs 1 and 2 on the digital receiver to your external unit using
a suitable coaxial cable.
or if you have installed an additional DVB-S tuner module:
b, c, i, h Connect LNB inputs 1 and 2 and LNB inputs 3 and 4 with your external
unit using a suitable coaxial cable.
Also see section 8.6 (DVB-S antenna setting) in your operating manual.
4.2.2 Operating with 1 DVB-S antenna signal
In exceptional cases you can also operate the receiver using just one DVB-S antenna sig-
nal. However, in this event the recording and PIP functions are only available to a limited
extent. (see section 8.6.3 in your operating manual).
If you have not installed an additional DVB-S tuner module:
b Connect the LNB Input 1 of the digital receiver to your external unit using
a suitable coaxial cable
or if you have installed an additional DVB-S tuner module:
h, j, b Connect the LNB Input 3 of the digital receiver to your external unit using
a suitable coaxial cable. Now also connect the loop out output with the LNB
input 1.
Also see section 8.6 (DVB-S antenna setting) in your operating manual.
4.2.3 Operating with DVB-C/T antenna signals
The digital receiver can receive signals to DVB-C or DVB-T standard. Reception in parallel
with DVB-S reception is also possible
If you have not installed an additional DVB-C/T tuner module:
g Connect the RF IN antenna input on the digital receiver to your external unit
using a suitable coaxial cable.
or if you have installed an additional DVB-C/T tuner module:
g, k, l Connect the antenna Input RF INon the digital receiver to your external unit
using a suitable coaxial cable. Now also connect the loop out output with the
LOOP IN antenna input of the tuner module.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat TechniCorder ISIO STC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TechniCorder ISIO STC in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat TechniCorder ISIO STC

Technisat TechniCorder ISIO STC User Manual - German - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info