526754
17
Zoom out
Zoom in
Previous page
1/24
Next page
17

1- The TECHNITOOL S.M.A.R.T.program is required to upgrade firmware
Connect the instrument to the mains and turn it on.
Connect the USB cable FIRST to the meter and THEN to the PC.
Start the TECHNITOOL S.M.A.R.T. Program.
Click Instrument and thenUpgrade Instrument In the TECHNITOOL S.M.A.R.T.
program menu.
In the Open window, select the file to be used for up-grades and confirm the selection by
pressing theOpen key.
The Upgrade Firmware window will then open, where you can select the instrument
model.
Press “Upgrade” to start the up-grade.
When the up-grade has been completed correctly, the PC will show the message Program
Successful and a brief summary of the instrument settings.
Turn the instrument on and check the number of the new firmware version in the start-up
window or the Self-Test.
WARNING!
Do not switch-off, use or disconnect the Meter from the mains during the up-grade.
If the up-grade procedure is not successful:
- Check connections and repeat the operation
- If the operation described in this paragraph continues to fail, contact TECHNISAT
2- The PRO version of the TECHNITOOL S.M.A.R.T. program is required to load a MEM file
in your meter
Connect the instrument to the mains and turn it on.
Connect the USB cable FIRST to the meter and THEN to the PC.
Start the TECHNITOOL S.M.A.R.T. program.
Click Instrument and thenConnect Instrument in the TECHNITOOL S.M.A.R.T.
program menu.
A window will open where you can select your meter model and START the connection.
Click TOOLSand then MEM and OPEN MEM in the TECHNITOOL S.M.A.R.T. program
menu.
Select the MEM file downloaded from the TECHNISAT’s Service web site.
Click Instrument and thenMEM and WRITE MEM TO INSTRUMENTin the
TECHNITOOL S.M.A.R.T. program menu. TheTECHNITOOL S.M.A.R.T.program will upload
the new MEM file to your meter.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat TECHNI-TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat TECHNI-TOUCH in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info