526740
40
Zoom out
Zoom in
Previous page
1/70
Next page
- 40 -
Electronic Programme Guide (EPG)
Some, but not all channels send information about the
currentandnextprogrammes.PresstheEPG button
toviewtheEPGmenu.
Info bar commands:
RED button:Previousday.
GREEN button: Next day.
YELLOW button: Zooms to the selected programme.
Next day:displayslteringoptions.
BLUE button:displayslteringoptions.
(RECORD):theTVwillstarttorecordtheselected
progamme. You can press again to stop the recording.
IMPORTANT: To record a programme, you should first
connect a USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording feature.
Otherwise, recording feature will not be available.
NOTE: Switching to a different broadcast or source is
not available during the recording.
Programme Options
InEPGmenu,presstheOK button to enter the Event
Options menu.
Select Channel
InEPGmenu,usingthisoption,youcanswitchtothe
selected channel.
Record / Delete Record Timer
AfteryouhaveselectedaprogrammeinEPGmenu,
press the OK button and and Options screen will be
displayed. Select “Record” option and press the OK
button. After this operation, a recording becomes set
to the selected programme.
To cancel an already set recording, highlight that
programme and press the OK button and select the
option “Delete Rec. Timer”. The recording will be
cancelled.
Set Timer / Delete Timer
AfteryouhaveselectedaprogrammeinEPGmenu,
press the OK button and and Options screen will
be displayed. Select “Set Timer on Event” option
and press OK button. You can set a timer for future
programmes. To cancel an already set timer, highlight
that programme and press the OK button. Then select
Delete Timer” option. The timer will be cancelled.
NOTE: It is not possible to record or set timer for two or
more individual events at the same time interval.
Recording a Programme
IMPORTANT: When using a new USB hard disk drive, it is
recommended that you rst format the disk using your TV’s
“Format Disk” option.
Torecordaprogramme,youshouldrstconnecta
USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording
feature.
For using recording function, you should connect a
USB disk or an external hard disk drive to the TV and
the connected USB disk should have at least 1 GB
capacity and should have 2.0 speed compatibility.
If the connected USB device does not support 2.0
speed, an error message will be displayed.
NOTE: Recorded programmes are saved into the
connected USB disk. If desired, you can store/copy recordings
on a computer; however, these les will not be available to
be played on a computer. You can play the recordings only
via your TV.
NOTE: Lip Sync delay may occur during the timeshifting.
Timeshifting and recording features will not function
in radio channels. The TV can record programmes
up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufcient,recordingmayfailandtimeshiftingfeature
may not be available.
Recordings of HD programmes can occupy bigger
sizeontheUSBdiskdependingonthebroadcast’s
resolution. For this reason it is recommended to use
USB hard disk drives for recording HD programmes.
Do not plug out the USB/HDD during the recording.
This may harm the connected USB/HDD.
Multipartiton support is available. Maximum two
different partitions are supported. If the disk has
more than two partitions, a crash may occur. The
rstpartitionoftheUSBdiskisusedforPVRready
features. It also must be formatted as primary partition
tobeusedforPVRreadyfeatures.
Some stream packets may not be recorded because of
signal problems, so sometimes the video may freeze
during playback.
Record,Play,Pause,Display(forPlayListDialog)keys
cannot be used when teletext is ON. If a recording
starts from timer when teletext is ON, teletext is
automatically turned off. Also the teletext usage is
disabled when there is ongoing recording or playback.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat Tareo 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat Tareo 40 in the language / languages: English, German, French as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info