728161

Technisat Digitradio 630 Manual

27
Zoom out
Zoom in
Previous page
1/267
Next page
52 53
EN
FR
IT
NL
NW
DK
PL
CZ
SK
All previously stored stations and settings will now be deleted. After resetting you can start or skip the
set-up wizard (Section 14.7).
14.6 Soware update
From time to time software updates may be provided which could contain improvements or bug fixes.
This keeps the DIGITRADIO permanently up-to-date.
> Press the MENU button and select Main menu System settings > Software update.
If you are in a submenu, select the Main menu as described in Section 5.1.
> Select Auto Update if the DIGITRADIO should search for new software versions periodically.
> Select Check now if you would now like to check whether there is a more recent software version
available.
If a soware update has been located, follow the instructions on the display.
In order to find soware updates and upload them, the DIGITRADIO must be connected to the Internet. Do
not switch o the DIGITRADIO during the update process.
14.7 Set-up wizard
> Press the MENU button and select Main menu System settings > Set-up wizard.
If you are in a submenu, select the main menu as described in Section 5.1.
When switching on for the first time the Set-up wizard starts automatically.
> As soon as Run now is shown on the display, select YES.
If you select No, the wizard closes and you must perform the required seings manually. You will be taken
through the seings in various steps.
> Under Date/Time select the desired display format for the time display (Section 14.3).
> During the next step you must select via which source the Time is to be synchronised (Section 14.3).
> Then select whether summer or winter time is currently applicable.
Depending on the time and date settings, some network settings are now performed.
> Ensure that the device is within the reception range of the desired WLAN network and that you have
access data or that a network cable is connected. In some cases it may be necessary to carry out some
settings on the router. In this case, please refer to the corresponding instruction manual.
After a search for available wireless networks you are shown the result.
> Select the desired wireless network or cable and confirm the selection with OK.
If it is a protected network you will be asked to enter the corresponding access key.
> To do so, highlight the corresponding character using the Arrow buttons, or SCROLL&SELECT.
> Enter the selected character by pressing the OK button or SCROLL&SELECT.
Proceed in this way until the complete access key can be seen in the input field.
Highlighting and confirming the BKSP field enables you to delete the last character entered. The
CANCEL field is used to abort the entry.
> To close the wizard press the OK button or SCROLL&SELECT when Set-up wizard closed appears on
the display.
14.8 Info
> Press the MENU button and select Main menu System settings > Info.
BDA_DIGITRADIO_600_630.indd 52-53 22/06/2018 09:31
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat Digitradio 630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat Digitradio 630 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info