11
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and /or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adaptor cable to the DC IN socket at the rear of unit. Then
insert the power adaptor into the mains socket.
Press the VOLUME/ knob to turn unit on.
Press the VOLUME/ knob a second time to switch unit standby.
To turn off unit completely, unplug the power adapter from the mains socket.
Radio Auto-standby
To avoid unnecessary energy consumption, the radio will automatically go to standby after 15
minutes if the radio isn’t playing any program/track.
Charging from USB port
The USB port is designed for media playback and charging mobile devices (e.g. MP3 player,
mobile phone, etc.). It supplies 5 V DC at a charging current of up to 1000 mA (1 A).
Use a USB cable (not included) to connect mobile device to the USB port of the unit and the
mobile device will start charging.
" Note: the USB port is only suitable for charging 5V 1A (or less) mobile phone device and it
support charging in all modes except Music player mode. In Music player mode the USB port
is only for media playback.
Volume Control
Adjust the radio volume by turning VOLUME/ knob. Turn anti-clockwise to decrease volume
and turn clockwise to increase volume.
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket
is located at the rear of unit. Headphones are not supplied with this radio.
Turn down the volume before connecting headphones. Slowly raise the volume with the
headphones on until you reach your desired level.
Caution: long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using headphones, especially for extended periods of time.