729532
16
Zoom out
Zoom in
Previous page
1/18
Next page
GB-15
AUX operation
There is an AUDIO IN” socket located at the back of the unit. Analogue audio sound signals from
other sources can be input to the unit through this socket.
1. Connect the input to another audio device via an AUX cable (not included) with an AUDIO IN”
socket.
2. Press the MODE button repeatedly to select AUX in mode.
3. Turn the VOLUME +/dial on the unit or press the VOL +/buttons on the remote control to
adjust the volume control for your desired sound output level.
4. In AUX mode, operate your audio device directly for playback features.
When connecting the external audio device, refer to the owner's manual of the external device.
Sleep Setting
This function allows you to program the unit to turn to standby mode by itself after a set period of
time.
1. To activate the sleep function, press the SLEEP button repeatedly. The time will change in the below
sequence on every press:
Sleep OFF 15MINS 30MINS 45MINS 60MINS
2. When your desired sleep time appears in the display, stop pressing the button and the sleep
function will be activated in two seconds. will show on the display. Also the time remaining
until switch off is displayed next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby mode. To turn the sleep
function off while the sleep timer is still counting down, press the SLEEP button repeatedly to select
“SLEEP OFF. will disappear from the display.
4. Press the SLEEP button once to show the sleep timer status on the display when it is turned on.
Alternatively,
1. Press the MENU but
ton on the remote control to display the function main menu. Press the
/
buttons to select Main menu, and then press the SELECT button to confirm.
2. Press the
/
buttons to select Sleep mode, and then press the SELECT button to confirm.
3. Press the
/ buttons to select sleep timer, and then press the SELECT button to confirm.
Setting the Alarm
1. Press the ALARM button on the remote control, the display shows Alarm (1 or 2): Off [hh:mm].
2. Press the / buttons to select the Alarm number (1 or 2) and then press the SELECT button to
start the setting of the following parameters.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat DIGITRADIO 306 IR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat DIGITRADIO 306 IR in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat DIGITRADIO 306 IR

Technisat DIGITRADIO 306 IR User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info