424664

Technisat digitmod t1 Manual

40
Zoom out
Zoom in
Previous page
1/54
Next page
> Use the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line
Change Receiver PIN.
> Confirm by pressing OK.
> Now use the numeric keys to enter the current
receiver PIN code (Default setting 0000).
(Fig. 8-11)
> Use the numeric keys to enter the desired new
receiver PIN code.
> Repeat the entry of the code.
> When you have changed the receiver PIN code as
described here, press the Menu key to return to nor-
mal operation.
Note!
Ensure that you do not forget the receiver PIN code. If you do
forget it, please consult your specialist retailer!
8.3.2 Mode
> In this line, use the arrow keys left/right to switch
the parental control on or off.
8.3.3 Selecting a programme
> Press OK. The Favourites list of the selected range
(TV or Radio) will be displayed. The programme cur-
rently selected will be highlighted.
(Fig. 8-12)
> Press the green function key to switch back and forth
between radio and TV lists.
> Press the red function key to display a selection win-
dow. Here you have the option of selecting the desired
type of programme list.
> Use the arrow keys up/down to select the desired
type of programme list, e.g. Favourites list.
> Confirm by pressing OK. The programme list selected
will be displayed.
> Now use the arrow keys to mark the programme
which you wish to block.
> Block access to the programme by pressing the yel-
low function key. The parental control symbol
will be displayed next to the programme selected.
>To block access to a number of programmes simulta-
neously, proceed as described in 8.1.2 (Marking
Blocks) and block the whole group by pressing the
yellow function key.
40
(Fig. 8-11)
(Fig. 8-12)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 40
Downloaded from www.Manualslib.com manuals search engine
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat digitmod t1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat digitmod t1 in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info