If under the heading Programme you have selected a pro-
gramme that is blocked in terms of Point 8.3, you will first
have to enter the PIN code before the data can be transfer-
red to memory.
> Press the TV/Radio key to return to normal operation.
7.16.2 Timer overview
The timer overview function gives you an overview of all timer events
already programmed.
> To go to the menu Timer overview, call up the menu
Manage timer as described above.
> Use the arrow keys up/down to mark the line Timer
overview.
> Confirm by pressing OK.
If there are overlapping timer events, these overlaps will be mar-
ked in red.
7.16.3 Change timer programming
> To change an existing timer setting, use the arrow keys
up/down to mark the timer event you wish to change.
> Press the yellow function key Change to go to the settings
of the marked timer. Make the changes as described in Point
7.16.1.2.
> When you have completed the programming, press the yel-
low function key Accept to accept the data into memory.
7.16.4 Delete timer programming
> To delete an existing timer setting, use the arrow keys
up/down to mark the setting.
> Press the green function key Delete.
A message will be displayed: “Do you really want to delete
this timer?”
> Use the arrow keys left/right to select Yes.
> To delete the timer setting, confirm by pressing OK.
7.16.5 Programming a new timer event
> To programme a new timer event, use the arrow keys
up/down to mark a blank line in the menu Timer over-
view.
> Press the yellow function key New to go to the entry win-
dow allowing you to programme a new timer event. Complete
this in accordance with Point 7.16.1.2.
37
