486807

Technisat DigiPal 2 TX e DVB-T Manual

8
Zoom out
Zoom in
Previous page
1/56
Next page
8
Ending the menu
By pressing the TV/Radio key, you are returning to normal operation mode.
Start electronic programme magazine
Press the SFI/EPG key on the remote control of the digital receiver. >
The electronic programme magazine appears on the screen. Here, the programmes that you have
selected or the factory settings, with the current content, are shown. Now you can inform yourself about
the content of different programmes through the EPG function. EPG functions are also available, for
example, choosing a particular programme, setting a particular programme, or setting the recording timer.
Ending EPG
By pressing the menu or TV/Radio respectively, you can return to normal operation. >
Recording with the timer
Your receiver has a video recorder and station change timer, respectively. As to programming these
timers, they only differ according to timer type. You can set the timer manually, as described in this
chapter, or with the EPG function.
Programming the timer manually
Start the main menu with the menu key. >
Select the line, “Manage Timer,” using the up and down arrow keys. >
Confirm with “OK.” The sub menu, “Manage timer,” appears. >
Choose the timer type you want to set with the up and down arrow keys. >
By pressing the “OK” key, you arrive at the command window for the programming of a new timer event. >
To set this, use the following method:
Source
Select the column, “Source,” with the arrow keys. >
Press the “OK” key. >
Choose the source (TV or radio) in the open selection window with the up and down arrow keys. >
Confirm with “OK.” Now, according to your previous settings, the TV or radio lists are shown. >
Select the programme with the arrow keys. >
With the up and down arrow keys, you move up or down one line in the list. >
With the left and right arrow keys, you toggle between pages. >
By pressing the “OK” key, your selection is set in the timer. >
Date
Select the “Date” column with arrow keys. >
Enter the four-number date with the number pad, when the timer event should take place. >
Start
Select the “Start” column with the arrow keys. >
Enter the start time with the number pad. >
Stop
Repeat the steps described in the “Start” section in order to set the ending time (except with station- >
change-timer.)
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat DigiPal 2 TX e DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat DigiPal 2 TX e DVB-T in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat DigiPal 2 TX e DVB-T

Technisat DigiPal 2 TX e DVB-T User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info