536100
95
Zoom out
Zoom in
Previous page
1/200
Next page
Part IV Sequencer
95
QQTG0692
Sequencer
CYCLE PLAY
You can aurally check the data you are editing by
accessing the CYCLE PLAY display from the
NOTE EDIT display.
If you wish other tracks to be played back,
they should be selected beforehand on the
SEQUENCER PLAY display. (Refer to page
81.)
1.
On the NOTE EDIT display, press the PLAY
button.
The display looks similar to the following.
2.
Use the START MEASURE
and
buttons
to select the beginning playback measure.
3.
Use the END MEASURE
and
buttons to
select the last playback measure.
4.
Press the START/STOP button.
Cycle playback of the specified measures
begins.
If the SOLO button is turned on, playback
changes to that of the recording track only. If it
is turned off, all the tracks specified on the
SEQUENCER PLAY display are played back.
5.
To stop cycle playback, press the START/
STOP button again.
During playback stop, if the SEQUENCER
RESET (FILL IN 1) button is pressed, the
SEQUENCER returns to the measure number
specified in step 2. If the SEQUENCER
RESET button is pressed again, the
SEQUENCER returns to measure 1.
Drum Edit
The DRUMS part can be edited on a specialized display. This differs from the normal STEP RECORD edit
procedure, and is a convenient way to check the data for each note.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
DRUM EDIT.
3.
On the PART SELECT display, select the
track for the DRUMS part.
The CHORD, RHYTHM and CONTROL tracks
cannot be selected.
The display looks similar to the following.
4.
Use the SOUND
and
buttons to select the
percussion instrument you wish to edit.
The number to the left of the instrument name
is its MIDI NOTE NUMBER in the Technics
arrangement.
If sounds other than percussion instrument
sounds are assigned, they are not displayed.
5.
Use the MEAS and buttons to select the
measure you wish to edit.
6.
Use the CURSOR
and
buttons to move
the cursor () to the point you wish to edit.
Recorded performance data is shown as verti-
cal bars. Data selected for editing is high-
lighted.
You can use the INC
and
buttons to
change the increment of cursor movement.
The resolution can be set at
q
/96. However, if
NOTE data is present between increments,
the cursor will stop.
Use the POS and buttons to change the
value.
(Continued on the next page)
09_Part IV.fm 95 ペー ジ 2003年2月 5日 水曜日  午後1時34分
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SX-KN2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SX-KN2600 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info