536100
78
Zoom out
Zoom in
Previous page
1/200
Next page
Part IV Sequencer
78
QQTG0692
Sequencer
Realtime Record
With REALTIME RECORD, your performance is recorded with the timing exactly as you played it on the
keyboard. Use this mode to record your performance in up to 16 tracks and create your own orchestra or
band.
Recording procedure
1.
Press the PROGRAM MENUS button to turn it
on.
The display changes to the following.
2.
Select SEQUENCER.
The display looks similar to the following.
When you press the PANEL WRITE button,
the PANEL WRITE display appears. To store
the currently active settings, such as the
sounds, at the beginning of the song, press
the OK button.
3.
Use the SONG
and
buttons to select a
song number in which to record. (The song
number is shown on the display.)
4.
Select RECORD & EDIT.
The display looks similar to the following.
5.
Select REALTIME RECORD.
The display looks similar to the following.
6.
Use the buttons below the display to turn on
the REC indication above the track numbers
you are going to record.
While you are recording, you can play back
tracks which are already recorded. Press the
corresponding balance buttons to display
PLAY above the track number you wish to
have played back.
For the RIGHT 1, RIGHT 2 and LEFT parts,
you can select two or more tracks to record at
one time; however, to record a performance
part, the corresponding button in the CON-
DUCTOR must also be on. For parts that are
not in the CONDUCTOR, multiple parts can-
not be recorded at one time.
To record AUTO PLAY CHORD (APC) parts,
turn on the AUTO PLAY CHORDs OFF/ON
button. In this case, press the START/STOP
button when beginning recording.
The track for the RHYTHM (RHY) part can be
selected for recording only when STEP
RECORD is active.
7.
Set the sounds, effects, volumes, etc. for the
parts you are going to record.
If you press the MIXER button, you can use
the MIXER display to visually adjust the set-
tings for each track.
The LOCAL ON/OFF setting on the MIXER
display is used to specify whether the part
assigned to that track sounds when it is played
on the keyboard during recording. For the
LOCAL ON/OFF during playback, use the
TRACK ASSIGN display to adjust the settings.
(Refer to page 91.)
If you are recording GM2 song data, select
from the GM2 group in the SOUND
EXPLORER.
The panel settings which are active at the
beginning of recording are stored.
09_Part IV.fm 78 ペー ジ 2003年2月 5日 水曜日  午後1時34分
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SX-KN2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SX-KN2600 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info