536100
5
Zoom out
Zoom in
Previous page
1/200
Next page
5
QQTG0692
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the
safety precautions listed below. Keep these operating instructions handy for future reference.
Safety
1.
Power Source—Connect the unit to a power
source of the type described in these instructions or
as marked on the unit.
2.
Polarization—The unit is equipped with a polarized
power plug where one blade is wider than the other.
This safety feature ensures that the plug fits into
your household AC outlet only one way. If the plug
doesn’t fit one way, try reversing it. If the plug still
doesn’t fit, contact an electrician to replace the
obsolete outlet. Do not attempt to defeat the safety
purpose of the plug.
3.
Power Cord protection—Route the AC power
supply cord so that it will not be walked on or
pinched by items placed on or against it. Never take
hold of the plug or cord with wet hands. Always
grasp the plug body firmly when connecting and
disconnecting it.
4.
Overloading—When connecting the AC power
supply cord, be careful not to overload the
household AC outlet, extension cord, or outlet from
any other device as this can result in fire or electric
shock.
5.
Nonuse periods—Turn the unit off when it is not in
use. Unplug the unit from the household AC outlet if
it is not to be used for a long time. Unplug the unit
during lightning storms.
6.
Attachments and accessories—Use only the
attachments and accessories recommended in
these operating instructions.
Installation
Placement
1.
Ventilation—Situate the unit so that it receives
proper ventilation. Do not install in a confined space
such as a bookcase or cabinet. Allow at least 10 cm
(4 inches) clearance from the rear of the unit. To
prevent the risk of electric shock or fire due to over-
heating ensure curtains and other materials do not
obstruct the unit’s ventilation.
2.
Foreign material—Ensure objects and liquids do
not get into the unit. Avoid exposing the unit to
excessive smoke, dust, mechanical vibration, and
shock.
3.
Magnetism—Situate the unit away from equipment
and devices that generate strong magnetic fields.
4.
Stacking—Do not place heavy objects on top of
this unit.
5.
Surface—Place the unit on a flat, level surface.
6.
Carts and stands—Use the unit only
with carts and stands recommended by
the manufacturer. Move carts with care.
Sudden stops, excessive force, and
uneven surfaces can cause carts to
overturn.
7.
Wall and ceiling mounting—Do not mount the unit
on walls or ceilings unless specified in the
instructions.
Environment
1.
Water and moisture—Do not use the unit near
water, such as near a bathtub or swimming pool.
Avoid damp basements.
2.
Heat—Situate the unit away from heat sources,
such as radiators.
Do not situate where temperatures fall below 5°C
(41°F) or rise above 35°C (95°F).
Maintenance
(See page 6 for details.)
Unplug the unit from the household AC outlet before
cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or
solvents.
Service
1.
Damage Requiring Service—The unit should be
serviced by qualified service personnel if:
(a) The AC power supply cord or the plug has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped or the cabinet dam-
aged.
2.
Servicing—Do not attempt to service the unit
beyond that described in these operating
instructions. Refer all other servicing to authorized
servicing personnel.
3.
Replacement parts—When parts need replacing
ensure the servicer uses parts specified by the
manufacturer or parts that have the same
characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other
hazards.
4.
Safety check—After repairs or service, ask the
servicer to perform safety checks to confirm that the
unit is in proper working condition.
IMPORTANT SAFETY INSTRUCTIONS
01_Caution for AC Mains Lead.fm 5 ページ 2003 年1月27日  月曜日 午後1時 40分
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SX-KN2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SX-KN2600 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info