622405
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
This unit is designed to conserve its power consumption and
save energy. The unit will turn to standby mode automatically
if there is no sound and it is not being used for approximately
20 minutes.
The factory default is “On”.
To cancel this function
1 Press and hold [MUTE] until the PHONO
indicator on this unit starts to blink.
2 Press [MUTE].
Each time you press the button:
3 Press [VOL s] to exit.
You will exit the auto off setup mode if you do not operate any
buttons and controls for approximately 10 seconds after any of the
three indicators above starts blinking.
When other equipment responds to the supplied remote
control, change the remote control code.
The factory default is “1”.
Point the remote control at this unit, and
press and hold [OK] and the numeric button
for at least 4 seconds.
When the code is changed, the PC indicator and the
COAX2 indicator blink for approximately 10 seconds.
When the ST-C700A/SL-C700 is connected via the system control
function, change its remote control code as well as the remote
control code for this unit.
You can automatically link this unit with the ST-C700A/SL-
C700 and operate them easily with the remote control.
Preparation
1 Connect this unit and the ST-C700A/SL-C700 with
system connection cables and coaxial digital cables.
(> 10)
2 Set the power switch lever of this unit and the ST-
C700A/SL-C700 to the [Í/I] position.
Switching this unit and the ST-C700A/SL-
C700 to on/standby simultaneously
If you point the remote control at this unit and press
[AMP Í] when this unit and the ST-C700A/SL-C700 are in
standby mode, this unit and the device of the selected input
source will be turned on simultaneously.
If you point the remote control at this unit and press
[AMP Í] when this unit and the ST-C700A/SL-C700 are
turned on, this unit and the ST-C700A/SL-C700 will
simultaneously enter standby mode.
Switching this unit’s input source
automatically
When you perform an operation such as playback on the ST-
C700A/SL-C700, the input source of this unit will be
automatically switched to “COAX1”/“COAX2”.
For information on the operations of the ST-C700A/SL-C700,
please also refer to their operating instructions.
If you install the dedicated app “Technics Music App” (free of
charge) on your tablet/smartphone, you can use a wide variety of
functions when the unit and the ST-C700A are connected.
For details, visit:
www.technics.com/support/
Auto off function
COAX3 indicator blinks On
OPT indicator blinks Off
Remote control code
[OK] + [1] Set the code to 1
[OK] + [2] Set the code to 2
Using the system control
function
SU-C700_SQTxxxx_EB_EBGN_mst.book 14 ページ 2015年6月12日 金曜日 午後4時4分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SUC700A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SUC700A in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info