622407
44
Zoom out
Zoom in
Previous page
1/52
Next page
44
Troubleshooting
“F ” ( ” stands for a number.)
There is a problem with this unit.
- Is the volume extremely high?
If so, lower the volume.
- Is this unit placed in an extremely hot place?
If so, move this unit to a cooler place and wait
a few moments and then try to turn it on
again.
If the problem persists, write down the
displayed number, disconnect the AC mains
lead and consult your dealer.
Load Fail
The firmware on the USB flash memory cannot
be found.
Download the latest firmware on the USB flash
memory and try again. ( 38)
No Device
No USB device is connected.
Connect the USB device to be played. ( 28)
No Network Available
This unit is not connected to the network.
Check the network connection. ( 18)
Not Measured
Measuring the output signal has not been done
yet.
Measure the output signal. ( 39)
Not Valid
The function you have tried to use is not
available with the current settings. Check the
steps and settings.
Please Wait
This is displayed, for example, when this unit
is turned to standby/on. (For up to approx.
1 minute and 30 seconds)
“Remote
” ( ” stands for a number.)
The remote control and this unit are using
different codes.
Change the code on the remote control. ( 15)
Remote Mode
Basic playback control buttons on the remote
control are not available. (While playing back
music stored on the DLNA server with this unit
(DMR), etc.)
Use the connected device for basic playback
control.
Searching
The unit is checking the DLNA server on the
network.
Signal Overflow
The audio from the analogue audio
input terminal in use is distorted. Select
Attenuator(LINE), and change the setting for
the analogue audio input terminal in use to
“On. ( 35)
Unlocked
“PC, “COAX1, “COAX2” or “OPT” is selected,
but no device is connected. Check the
connection with the device. ( 32, 33)
Audio signals, such as sampling frequency
components, are not input correctly.
- About supported format, refer to “File
format” ( 50)
USB Over Current Error
The iPhone/iPad/iPod or USB device is drawing
too much power. Disconnect the iPhone/iPad/
iPod or USB device and turn the unit to standby
and on again.
Wi-Fi Setup
Select “On” and press [OK] to enter the
network setting. ( 19)
- To exit the network setting, select “Off” and
press [OK].
Hub Device Not Supported/
Not Supported/
Device Not Recognized/
USB Device Not Supported
You have connected an iPhone/iPad/iPod or
USB device that is not supported.
- If the iPhone/iPad/iPod is compatible, turn it
on and connect it correctly.
The format of the file on the iPhone/iPad/iPod
or USB device is not supported.
- About supported format, refer to “File
format” ( 50)
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SU-G30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SU-G30 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SU-G30

Technics SU-G30 User Manual - German, Dutch - 192 pages

Technics SU-G30 User Manual - Danish - 192 pages

Technics SU-G30 User Manual - French, Italian - 192 pages

Technics SU-G30 User Manual - Swedish, Spanish, Finnish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info