622407
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
Control reference guide
Remote control code
When other equipment responds to the supplied
remote control, change the remote control code.
The factory default is “Mode 1.
1 Press [SETUP].
2 Press [ ], [ ] to select “Remote
Control” and then press [OK].
The current remote control code of this unit
is displayed.
3 When “Set Mode 1/2” is displayed, set
the remote control code of the remote
control.
To set “Mode 1:
Press and hold [OK] and [1] for at least 4
seconds.
To set “Mode 2”:
Press and hold [OK] and [2] for at least 4
seconds.
4 Point the remote control at this unit,
and press and hold [OK] for at least 4
seconds.
When the remote control code is changed,
the new code will appear on the display for a
few seconds.
When “Remote 1” or “Remote 2” is
displayed
When “Remote 1” or “Remote 2” is displayed,
the remote control codes of this unit and remote
control are different. Perform step 3 above.
01 [
]: Standby/on switch
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
02 [NET]/[DIGITAL]/[ANALOG]:
Select the device to be operated
( 24, 28, 29, 30, 31, 32, 33, 34)
03 [>INPUT<]: Switch the input source
04 [MENU]: Enter menu
( 24, 25, 27, 28, 30, 31)
05 [SETUP]: Enter setup menu ( 36)
06 [LAPC]: Measure the output signal of
the amplifier and correct its output
( 39)
07 [+VOL-]: Adjust the volume
-- dB (min), -99.0 dB to 0 dB (max)
08 [MUTE]: Mute the sound
Press [MUTE] again to cancel. “MUTE”
is also cancelled when you adjust the
volume or when you turn the unit to
standby.
09 Basic playback control buttons
10 [DIMMER]: Adjust the brightness of the
display, etc.
When the display is turned off, it will
light up only when you operate this unit.
Before the display turns off again, “Display
Off” will be displayed for a few seconds.
Press repeatedly to switch the brightness.
11 [INFO]: View content information
Press this button to display the
track, artist, and album names, file
type, sampling frequency, and other
information. (The information varies
depending on the input source.)
12 [
], [ ], [ ], [ ]/[OK]: Selection/OK
13 [RETURN]: Return to the previous
display
14 [DIRECT]: Turn on/off Direct mode
15 [RE-MASTER]: Turn on/off Re-master
16 Numeric buttons, etc.
To select a 2-digit number
Example:
16: [
10] > [1] > [6]
To select a 4-digit number
Example:
1234: [
10] > [ 10] > [ 10] > [1] > [2] > [3]
> [4]
[CLEAR]: Clear the entered value.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SU-G30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SU-G30 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SU-G30

Technics SU-G30 User Manual - German, Dutch - 192 pages

Technics SU-G30 User Manual - Danish - 192 pages

Technics SU-G30 User Manual - French, Italian - 192 pages

Technics SU-G30 User Manual - Swedish, Spanish, Finnish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info