622381
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
“Not Conditional”
The function you have tried to use is not available with the
current settings. Check the steps and settings.
“PGM Full”
The number of programmed tracks is more than 24.
“Please Wait”
This is displayed, for example, when this unit is turned
on/off. (For up to 1 minute and 30 seconds)
“Remote ” ( ” stands for a number.)
The remote control and this unit are using different codes.
Change the code on the remote control.
When “Remote 1” is displayed, press and hold [OK] and [1] for
at least 4 seconds.
When “Remote 2” is displayed, press and hold [OK] and [2] for
at least 4 seconds.
“Scan Failed”
Stations are not receivable. Check your antenna and try
Auto scanning. (> 21)
If “Scan Failed” is still displayed, find the best signal
reception with the “Manual Scan” tuning function. (> 21)
“Searching”
The unit is checking the DLNA server on the network.
“Unlocked”
“PC” is selected, but a PC is not connected. Check the
connection with the PC. (> 17)
Audio signals, such as sampling frequency components,
are not input correctly.
About supported format, refer to “File format” (> 31)
“USB Over Current Error”
The iPhone/iPad/iPod or USB device is drawing too much
power. Disconnect the iPhone/iPad/iPod or USB device
and turn the unit off and on again.
“Hub Device Not Supported”
“Unrecognizable Device”
“Unsupported”
“Unsupported USB Device”
You have connected an iPhone/iPad/iPod or USB device
that is not supported.
If the iPhone/iPad/iPod is compatible, turn it on and connect it
correctly.
The format of the file on the iPhone/iPad/iPod or USB
device is not supported.
About supported format, refer to “File format” (> 31)
Unit care
Pull out the AC mains lead from the outlet before
maintenance. Clean this unit with a soft cloth.
When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and
then wipe it with a soft cloth.
Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, a chemical wiper, etc. This might cause the exterior
case to be deformed or the coating to come off.
ST-C700A-SQT1004_EB_mst.book 28 ページ 2015年6月22日 月曜日 午前11時26分
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics STC700AEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics STC700AEB in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info