622382
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
Sound adjustment
The following sound effects can be added to the audio output.
Re-mastering expands the playback band and achieves a
higher bit depth to reproduce natural and expansive sound
close to original music.
The factory default is “Off”.
1 Press [NWP].
2 Press [RE-MASTER] to select “On”/“Off”.
This unit can transmit input signals without performing digital
signal processing (DSP). This enables faithful and high
quality reproduction of original sound.
The factory default is “Off”.
1 Press [NWP].
2 Press [DIRECT] to select “On”/“Off”.
You can set an upper limit on the output sampling frequency
range. Please note that the range that can be processed
differs depending on the amplifier or D/A converter. For
details, refer to the operating instructions of the connected
device.
The factory default is “32kHz-192kHz”.
Preparation
Set “Digital Output” to “On”.
1 Press [NWP].
2 Press [HOME].
3 Press [3, 4] repeatedly to select “SETUP”
and then press [OK].
4 Press [3, 4] repeatedly to select “D.Output
fs” and then press [OK].
5 Press [3, 4] to select an item and then
press [OK].
You can select a sampling frequency of 96 kHz or 192 kHz.
Disabling the audio output of unused terminals minimises
noise and allows playback in higher audio quality.
The factory default is “On”.
1 Press [NWP].
2 Press [HOME].
3 Press [3, 4] repeatedly to select “SETUP”
and then press [OK].
To disable the digital audio output:
Press [3, 4] repeatedly to select “Digital Output” and
then press [OK].
To disable the analogue audio output:
Press [3, 4] repeatedly to select “Analog Output” and
then press [OK].
4 Press [3, 4] to select “Off” and then press
[OK].
To enable the output again, select “On”.
Depending on the music source that you play back, the applied
setting may be less effective.
Depending on the music source that you play back, it may not be
possible to achieve the desired audio quality and sound field
effect. In such cases, turn off this function.
Both Re-master and Direct mode cannot be set to “On”.
When “Digital Output” and “Analog Output” are set to “Off”, no
sound will be output.
It may take some time to output audio when you have adjusted the
audio quality.
Listening to more natural-
sounding audio (Re-master)
Direct mode
Setting the sampling
frequency
Disabling audio output
ST-C700-SQT0492_EBGN_mst.book 22 ページ 2015年6月15日 月曜日 午前9時16分
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics ST-C700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics ST-C700 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics ST-C700

Technics ST-C700 User Manual - German, Dutch - 124 pages

Technics ST-C700 User Manual - Danish - 124 pages

Technics ST-C700 User Manual - French, Italian - 124 pages

Technics ST-C700 User Manual - Polish - 36 pages

Technics ST-C700 User Manual - Swedish, Spanish, Finnish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info