618907
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
The sound is interrupted.
Depending on your environment, the audio may be
interrupted during playback. Check the operating
instructions of the connected device and the connection to
the device.
Playback does not start.
Depending on your environment or connected devices, it
may take some time.
The system control function is not working.
Connect the system connection cable to the system
terminal [CONTROL2] of the SU-C700.
Connect the coaxial digital cable to the digital audio input
terminal [COAX2 IN] of the SU-C700.
The unit turns off automatically.
Is the auto off function turned on? (> 14)
If the SU-C700 is connected to this unit via the system
control function, this unit may turn off automatically when
you turn off the SU-C700. (> 9, 16)
Incorrect display or play does not start.
Make sure that the disc is compatible with this unit. (> 17)
There is moisture on the lens. Wait for about an hour and
then try again.
Unfinalised CD-R and CD-RW cannot be played back.
Playback takes time to start .
It may take some time for the disc to load if there are a lot
of tracks or folders on it.
The remote control does not work properly.
To avoid interference, please do not put any objects in front
of signal sensor. (> 7)
Change the remote control code if other products react to
this remote control. (> 16)
If SU-C700/ST-C700 is selected as the equipment to be
operated, press [CD] and then try the operation again.
(> 8)
When this unit and the SU-C700 are connected with an
audio cable, switch the input of the SU-C700 to “LINE”.
Pressing [DIMMER] changes the display, the light
and the indicator brightness of the SU-C700/ST-
C700.
[DIMMER] works for the SU-C700/ST-C700 as well as this
unit. Turn off the device that you want to maintain the
brightness level of, and press [DIMMER].
The following messages or service numbers may appear
on the unit’s display.
“Full”
The number of programmed tracks is more than 25.
“Not Conditional”
The function you have tried to use is not available with the
current settings. Check the steps and settings.
“No Disc”
Insert the disc to be played (> 11).
“No File
Insert the disc to be played (> 11).
Insert a disc that has MP3/WMA files on it (> 17).
“No Play”
A CD that is not in CD-DA , MP3 or WMA format is
inserted. It cannot be played.
Examine the content. You can only play supported format.
(> 17)
“Reading”
The unit is checking the CD information. After this display
has disappeared, start operating.
“Remote ” (“ ” stands for a number.)
The remote control and this unit are using different codes.
Change the code on the remote control.
When “Remote Mode 1” is displayed, press and hold [OK] and
[1] for at least 4 seconds.
When “Remote Mode 2” is displayed, press and hold [OK] and
[2] for at least 4 seconds.
-- --:-- --
The display time is over 99 minutes and 59 seconds.
Disc
Remote control
Supplied with the SU-C700/ST-C700
Messages
SL-C700-SQT0708_E_mst.book 18 ページ 2015年6月12日 金曜日 午後6時49
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SLC700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SLC700E in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SLC700E

Technics SLC700E User Manual - German, Dutch - 84 pages

Technics SLC700E User Manual - Danish - 52 pages

Technics SLC700E User Manual - French, Italian - 84 pages

Technics SLC700E User Manual - Polish - 20 pages

Technics SLC700E User Manual - Swedish - 52 pages

Technics SLC700E User Manual - Spanish - 84 pages

Technics SLC700E User Manual - Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info