618907
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
Make settings to play back CD EXTRA discs.
Audio : Plays back CD-DA data.
MP3/WMA : Plays back MP3/WMA data.
The factory default is “Audio”.
Operation with the touch panel on the unit:
1 Touch [MENU] repeatedly to select “Setup”
and then touch [1/;].
2 Touch [MENU] repeatedly to select “CD
EXTRA”.
3 Touch [:, 9] to select an item and
then touch [1/;].
Operation with the SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [MENU].
3 Press [3, 4] repeatedly to select “Setup”
and then press [OK].
4 Press [3, 4] repeatedly to select “CD
EXTRA”.
5 Press [2, 1] to select an item and then
press [OK].
Re-mastering expands the playback band and achieves a
higher bit depth to reproduce natural and expansive sound
close to original music.
The factory default is “Off”.
Operation with the touch panel on the unit:
1 Touch [MENU] repeatedly to select
“RE-MASTER”.
2 Touch [:, 9] to select an item and
then touch [1/;].
Operation with the SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [RE-MASTER] to select “On”/“Off”.
This function works for both the analogue and digital audio outputs.
You can set the upper limit for the sampling frequency for
signals output from the digital audio output terminal when
[RE-MASTER] is “On”. The sampling frequencies you can
transmit depend on the device you have connected. Refer to
the operating instructions for the device you have connected
for details.
The factory default is “176.4kHz”.
We recommend that you select “176.4kHz” when you have
connected this unit and SU-C700 as a system. (> 9)
Operation with the touch panel on the unit:
1 Touch [MENU] repeatedly to select “Setup”
and then touch [1/;].
2
Touch [MENU] repeatedly to select “Digital Output”.
3 Touch [:, 9] to select an item and
then touch [1/;].
4
Touch [
] twice after you have finished setting.
Operation with the SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [MENU].
3 Press [3, 4] repeatedly to select “Setup”
and then press [OK].
4 Press [3, 4] repeatedly to select “Digital
Output”.
5 Press [2, 1] to select an item and then
press [OK].
You can select a sampling frequency of 44.1 kHz or
176.4 kHz
.
6
Press [MENU] after you have finished setting.
Depending on the music source that you play back, the applied
setting may be less effective.
Depending on the music source that you play back, it may not be
possible to achieve the desired audio quality and sound field
effect. In such cases, turn off this function.
It may take some time to output audio when you have adjusted the
audio quality.
This has no effect on analogue audio output.
Sound may not be output when you set to 176.4 kHz, depending
on the device you have connected. Set to 44.1 kHz if this occurs.
([RE-MASTER] will be disabled.)
CD EXTRA
Listening to more natural-
sounding audio (Re-master)
Setting the upper limit for the
sampling frequency during
digital output
SL-C700-SQT0708_E_mst.book 15 ページ 2015年6月12日 金曜日 午後6時49
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SLC700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SLC700E in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SLC700E

Technics SLC700E User Manual - German, Dutch - 84 pages

Technics SLC700E User Manual - Danish - 52 pages

Technics SLC700E User Manual - French, Italian - 84 pages

Technics SLC700E User Manual - Polish - 20 pages

Technics SLC700E User Manual - Swedish - 52 pages

Technics SLC700E User Manual - Spanish - 84 pages

Technics SLC700E User Manual - Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info