536286
9
Zoom out
Zoom in
Previous page
1/12
Next page
RQT5701
9
1.
3.
OPEN/CLOSE
123
456
7890
10
SEARCH
A-B REPEAT
REPEAT
RANDOM
AUTO
CUE
TAPE LENGTH
SIDE A/B
TIME FADE
PEAK SEARCH
PROGRAM
CLEAR
RECALL
TIME
MODE
SKIP
LEVEL
TAPE LENGTH
SIDE A/B
TAPE LENGTH
PEAK SEARCH
SIDE A/B
1 9 0
PEAK SEARCH
TAPE LENGTH
1
2
-3.
3
2
-1.
POWER
CD edit recording
You can specify the length of the tape and the unit divides the tracks
on the CD between the two sides so they arent cut off.
A four-second interval is added between tracks so that tape program
sensor functions that find the beginnings of tracks will work correctly.
There is also a peak search feature that makes it easier to adjust the
recording level on the cassette deck.
Preparation: Prepare the cassette deck and tape.
Refer to the cassette decks operating instructions.
If it is a double-sided deck, set the reverse mode to single-sided re-
cording and the play direction to .
1 Remote control only
Press [TAPE LENGTH] to specify the
tape length.
The tape length changes each time you press the button.
C-46 C-60 C-90 C---
The unit programs the tracks to go on sides A and B.
To select an irregular tape length, select C--- , then press
the numbered buttons to enter the total length of the tape (1
to 99 minutes). For example, for a five-minute tape, press [0]-
[5]. Press [TAPE LENGTH] to select C--- again if you
enter the wrong time.
To add tracks to the extra space, see below.
To show the information for side B, press [SIDE A/B].
2 Adjust the recording level.
1. Press [PEAK SEARCH].
The search takes about one and a half minutes for a 60-
minute CD. The unit repeatedly reproduces a 6-second seg-
ment around the peak.
2. Adjust the recording level.
Refer to the cassette decks operating instructions.
3. Press [ ] to stop the CD.
3 Press [ ] at the same time you begin
recording.
When the tracks allotted to side A finish playing
Play pauses at the beginning of the first track for side B. Allow the
cassette deck to record to the end of side A.
To continue recording on side B
1. Eject the tape and wind on the leader.
2. For a double-sided deck
Reinsert the tape and set the play direction to .
For a single-sided deck
Turn the tape over and reinsert it.
3. Press [ ] at the same time you begin recording.
To cancel CD edit mode
Press [ ].
For your reference
You cannot edit more than 20 tracks.
To record in these cases, start normal play and recording at the
same time.
You can record specific tracks by programming them first ( page
8, steps 1 and 2).
Discs have multiple peaks so a different peak may be found each
time you perform a search.
Last track on side A Number of tracks on side A
Time remaining on side A
Track numbers on side A Track numbers on side B
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-PG4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-PG4 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info