536137

Technics SL-DZ1200 Manual

23
Zoom out
Zoom in
Previous page
1/28
Next page
RQT7114
23
Other functions
Using with other equipment
Before use
•Switch [PLAY SELECT] to select the media to be used
•Turn [MODE] on the rear panel to TURNTABLE
•Insert the SD Memory Card or CD to be used
Start play using the mixer’s fader
You can instantly start play from the auto cue point or cue point on this
unit using the mixer’s fader by connecting this unit to the control ter-
minal of a DJ mixer using a control cable connection. ( page 8)
Before use :
•Adjust buttons and control knobs of CH1 and CH4 on the DJ mixer
so mixed sound is output from the master output.
•Turn the DJ mixer’s FADER START CH1 and CH4 to on.
•On unit 1 or 2, set the auto cue point or set the cue point and select
the cue bank.
Starting with the channel fader
(e.g.)
When the fader operation switch on the DJ mixer is set to NORMAL
1. On the DJ Mixer, change the C.FADER ASSIGN A
switch to other than 1 and change the C.FADER AS-
SIGN B switch to other than 4
2.
Push the CH1, CH4 channel fader all the way to the bottom
3. During play or while paused on unit 1 or 2, press
[CUE STOP] (Back cue)
•Returns to the set point and pauses.
4. When you want to start play, push the CH1 or CH4
channel fader up
•At the same time, play begins from the set point on unit 1 or 2.
•
After you return the channel fader to its original position, unit back cues,
and pauses after returning to the set point.
Starting with the cross fader
(e.g.) When the cross fader operation switch on the DJ mixer is set to
NORMAL and to start play on CH1
1. On the DJ Mixer, change the C.FADER ASSIGN A
switch to 1 and change the C.FADER ASSIGN B
switch to 4
2. Push the cross fader all the way toward CH4 (
)
3. During play or while paused on unit 1, press [CUE
STOP] (Back cue)
4. When you want to start play, push the cross fader in
the opposite direction indicated in step 2, towards
CH1 ( )
•At the same time, play begins from the set point on unit 1.
You can relay play by connecting the control terminals of the two units.
( page 9)
Before use:
•Turn Auto Cue on for both units, set the auto cue point for the track
to be played and back cue.
Using two units for relay play
Press [PLAY/PAUSE] on the unit to be
played first
•Once track play finishes on the unit being played, play auto-
matically begins from the unit on standby.
•The unit that was played first pauses and cues at the next track’s
auto cue point.
•You can automatically alternate play between both units by repeat-
ing this method.
•You can listen to many different tracks by changing the media and
selecting the track of the unit in the standby position.
•Set the cue point, select the cue bank and back cue on the standby
unit to begin relay play from the desired point of the desired track.
Note
•During play, if power on one of the units is cut or turned off, play
may begin on the other standby unit.
•You cannot use fader start and relay play at the same time.
Using the amplifier and other equipment
Connect with the matching input terminals on the equipment (not in-
cluded). ( page 9)
•When using this unit’s DIGITAL OUT terminal, SD Audio is not out-
put.
1 Put the equipment on standby
2 Press [PLAY/PAUSE] to play
•Audio played from the connected equipment is output.
•You can alternate play by back cueing unit 2 connected to
CH4.
Push the cross fader all the way toward CH4 Play CH4
CH1 Back cue
Push the cross fader all the way toward CH1 Play CH1
CH4 Back cue
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-DZ1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-DZ1200 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SL-DZ1200

Technics SL-DZ1200 User Manual - German - 26 pages

Technics SL-DZ1200 Quick start guide - German - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info