536137
15
Zoom out
Zoom in
Previous page
1/28
Next page
RQT7114
15
Advanced operations
Platter operations
Before use
Switch [PLAY SELECT] to select the media to be used
Turn [MODE] on the rear panel to TURNTABLE
Insert the SD Memory Card or CD to be used
Platter slip
surface
Play on this unit is synchronized with the platter when Instant Change
is off. You can change the tempo using the platter slip surface.
Instant play
When Instant Change is off
1. While the platter slip surface is stopped, press [PLAY/
PAUSE]
2. Spin the platter slip surface when you want to start play
When Instant Change is on
Press [PLAY/PAUSE]
For several seconds after the start of play the INSTANT CHANGE
lamp flashes and the tempo or audio play cannot be changed
even by operating the platter slip surface.
You can also use the cue pad for instant play ( page 18)
Instant stop
When Instant Change is off
During play, hold and stop the platter slip surface, then
press [PLAY/PAUSE]
When Instant Change is on
During play, press [PLAY/PAUSE]
Use your hand to vary the platter slip surface
rotation speed
During play use your hand on the platter slip surface to
increase or decrease tempo.
Increasing or decreasing the rotation speed of the platter slip
surface changes the tempo.
The time display flashes and play sound does not change if the
platter slip surface is operated immediately after the disc is
loaded, or immediately after auto cueing.
Sound may not be output if you turn the platter slip surface im-
mediately after pressing [ ], [ ] to skip a track.
You cannot use the platter slip surface to move from the 1st track
back to the last track.
When using CD-R, CD-RW MP3 files you cannot use the platter slip
surface to move backward to the previous track.
You can also use [TEMPO] to change the tempo. ( page 16)
Changing play with your hand
Using the platter slip surface, you can improvise play with the platter
slip surface speed and direction of play using your hand.
Braking
Stop the platter slip surface with your hand during play
The audio being played will stop corresponding to the speed of
the platter slip surface.
Once you release the platter slip surface after you have stopped
play, the audio will begin to play corresponding to the speed of
the platter slip surface.
Spinning
Forcefully spin the platter slip surface faster than the
platter slip surface speed during play
Play is controlled by the platter slip surface rotation speed.
If you spin the platter slip surface too fast, the sound and the time
display will not keep pace.
Scratch playing
1. Press and stop the platter slip surface during play
Play stops.
2. Turn the platter slip surface in the direction and speed
you want to play
Play corresponds to the direction and speed of the platter slip
surface.
3. Release your hand from the platter slip surface
Play returns to its original state.
When pitch lock ( page 16) is on, the pitch does not change
even if you move the platter slip surface with your hand.
Basic play for DJs
Note
In order to begin play from any state on this unit right away, the CD
is always rotating. Because of this there may be some noise that
occurs due to rotation, however this is not a malfunction.
Switching [PLAY SELECT] during play or while paused, instantly
stops play, a PLEASE WAIT ! message appears in the display,
and the unit returns to the beginning of the CD or SD Memory
Card.
The time display flashes and [PLAY/PAUSE] does not function im-
mediately after the media is loaded, or immediately after skipping,
searching or auto cueing.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-DZ1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-DZ1200 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SL-DZ1200

Technics SL-DZ1200 User Manual - German - 26 pages

Technics SL-DZ1200 Quick start guide - German - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info