9
RQT6523
Before use
Connections
Note
Do not connect the AC mains lead until all other connections are
complete.
1 Flat cables.
Keep the cables as flat as possible against the back of the
unit.
2 Front speakers.
Connect with the speaker cables tagged with four colors.
To prepare the speaker cables, twist the vinyl tip and pull off
(a).
Connect so the color of the cable’s tag matches the terminal
(connect the cable tagged white to the gray terminal).
HF: High Frequency
LF : Low Frequency
¡To prevent damage to circuitry, never short-circuit positive
(+) and negative (–) speaker wires.
¡Connect only positive wires (tagged red and white) to
positive (+) terminals and negative wires (tagged black and
blue) to negative (–) terminals.
3 Center/surround speakers and
subwoofer.
Connect the center speaker with the 2-meter speaker cable
and the surround speakers with the 7-meter speaker cables.
The connection procedure is the same as for the front
speakers.
You will need a monaural connection cable to connect a
subwoofer (b).
Note
Caution
¡¡
Incorrect connection can damage the unit.
¡¡
Use the speakers only with the recommended system.
Failure to do so can damage the amplifier and speakers,
and can cause fire. Consult a qualified service person if
damage occurs or if a sudden change in performance is
apparent.
¡¡
Place the speakers on a stable surface such as the floor
or a sturdy shelf.
(Continued on next page)
Do not play distorted sounds over extended periods.
You can damage your speakers by playing sounds that include high
levels of noise. Reduce the volume in the following cases.
¡When turning the amplifier off.
¡When playing noise from FM broadcasts over extended periods.
Notes on speaker use
