Manual Technics SCEH790 (page 10 of 21) (English)

612807

Zoom out

Zoom in

1/21

RQT6866

Basic operations

RQT6866

Basic operations

Cassette tapes

See page 39 for tape selection.

Preparation: Press [Í/I] to turn the unit on.

1 Press [< OPEN] on deck 1 or deck 2 and insert

the cassette.

Close the holder by hand.

2 Press [DOLBY NR] to select Dolby NR on

(“ÎNR” appears) or off.

3 Press [REV MODE] to select the reverse mode.

Each time you press the button:

b: One side is played.

d: Both sides are played.

f: Both sides are played 8 times each.

4 Press ["] (reverse side) or [!] (forward side).

Play begins and the indicator changes to green.

5 Adjust the volume.

To stop the tape

Press [∫].

[A] To change the deck to be used

Press [DECK 1/2] to select the deck you want to play.

To listen to 2 tapes consecutively

Insert a tape into each deck and select “f”. Both tapes will be played

8 times each.

ªB

Finding a place on a tape

To fast-forward and rewind

Press [6] or [5] while the tape is stopped.

To find the beginning of a track (TPS: Tape program sensor)

Press [6] or [5] during play.

Play resumes from the beginning.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

≥Each deck’s play direction is stored in the system’s memory.

≥You can fast-forward or rewind the tape while you are playing or recording

a tape in another deck.

Press [DECK 1/2] to switch to the deck not playing, and then press

[6] or [5]. After the above operation, be sure to press [DECK 1/2] to

reselect the deck playing.

Note

TPS may not operate correctly in the following situations:

If the interval between tracks is less than 4 seconds.

If there is noise between tracks.

If there are silent parts within tracks.

Dolby noise reduction

Dolby NR reduces “hissing” when playing tapes. It increases the high fre-

quency region when recording and then reduces it in playback. Use the

same system during playback and recording. This unit has Dolby B NR

which reduces noise to a third.

Prerecorded cassettes and equipment marked “ÎNR” use Dolby B NR.

Tape direction rewind fast-forward

!65

"56

DECK 1/2

DOLBY NR

REV MODE

OPEN

114

∫

, 5

DECK 1/2

Í/I

VOLUME

DOWN

-- dB

MIN

0 dB

MAX

Î

DECK 1 DECK 2

Forward side

Tape facing down

Tape direction

The radio: preset tuning

There are two methods of presetting stations.

Automatic presetting: The stations the tuner can receive are preset.

Manual presetting: You can select the stations to preset and the order

they are preset in.

There are 39 channels available for presetting.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency presetting is to begin at (➡ page 17).

Hold down [SET].

Release the button when “AUTO MEMORY” appears.

The tuner presets all the stations it can receive into the channels in ascend-

ing order. FM stations are preset into channels 1 to 39, and AM stations are

preset into channels 21 to 39.

“SET OK” is shown when presetting is complete and the last station to be

preset is played.

“ERROR” is displayed if the tuner doesn’t receive any stations. Do preset-

ting manually if this happens (see below).

Note

AM stations replace any FM channels that were preset in channels 21

to 39.

Manual presetting

Preset the stations one at a time.

1 Tune to the required station.

2 Press [SET].

3 Press [TUNING (X or W)] to select a channel.

4 Press [SET].

The station occupying a channel is erased if another station is preset in that

channel.

Selecting channels

Preparation: Press [Í] to turn the unit on.

On the remote control

1 Press [TUNER/BAND].

2 Press the numbered buttons to select the

channel.

For channels 1 to 9 press the corresponding number.

For channels 10 or over press [S10/-/--], then the two digits.

e.g. To select channel 21: [S10/-/--]>[2]>[1]

3 Adjust the volume.

On the main unit

1 Select “PRESET” with [TUNING MODE].

2 Press [TUNING (X or W)] to select the channel.

MHz

SET

TUNER/

BAND

VOLUME

890

2, 4

DIGITAL

S.WOOFER

AV EFFECT

Í

SLEEP

CH SELECT

3D AI

PROGRAM

890

CANCEL

DISC

VCR/AUX/

6CH INPUT

TAPE/

DECK 1/2

SUPER

SOUND EQ

TUNER/

BAND

2/;

1∫

MUTING

VOLUME

PRO LOGIC

SUPER SRND

TEST

SETTUNING MODE

TUNING

S10/-/--

DISPLAY

sALBUM

S10/-/--

Preset channel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technics SCEH790 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technics SCEH790 Manual

Product: