612789
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
Control reference guide
Remote control code
When other equipment responds to the
supplied remote control, change the remote
control code.
The factory default is “Mode 1.
1 Press [SETUP].
2 Press [
], [ ] to select “Remote
Control” and then press [OK].
The current remote control code of this
unit is displayed.
3 When “Set Mode 1/2” is displayed,
set the remote control code of the
remote control.
To set “Mode 1”:
Press and hold [OK] and [1] for at least
4 seconds.
To set “Mode 2”:
Press and hold [OK] and [2] for at least
4 seconds.
4 Point the remote control at this
unit, and press and hold [OK] for
at least 4 seconds.
When the remote control code is
changed, the new code will appear on
the display for a few seconds.
When “Remote 1” or “Remote 2” is
displayed
When “Remote 1” or “Remote 2” is
displayed, the remote control codes of
this unit and remote control are different.
Perform step 3 above.
01 [
]: Standby/on switch
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
02 [CD]/[USB]/[ -PAIRING]: Select the
device to be operated ( 24, 26, 27,
28, 29)
03 [>SELECT<]: Switch the input source
( 30, 31, 32)
04 [MENU]: Enter menu ( 24, 26, 28, 32,
35)
05 [SETUP]: Enter setup menu ( 36)
06 [+VOL-]: Adjust the volume
0 (min) to 100 (max)
07 [MUTE]: Mute the sound
Press [MUTE] again to cancel. “MUTE”
is also cancelled when you adjust the
volume or when you turn the unit to
standby.
08 Basic playback control buttons
09 [INFO]: View content information
Press this button to display the
track, artist, and album names, file
type, sampling frequency, and other
information. (The information varies
depending on the input source.)
10 [
], [ ], [ ], [ ]/[OK]: Selection/OK
11 [RETURN]: Return to the previous
display
12 [DIMMER]: Adjust the brightness of
the display, etc.
When the display is turned off, it will
light up only when you operate this
unit. Before the display turns off again,
“Display Off” will be displayed for a few
seconds. (Basic control buttons on this
unit are not turned off.)
Press repeatedly to switch the
brightness.
13 Numeric buttons, etc.
To select a 2-digit number
Example:
16: [
10] > [1] > [6]
To select a 4-digit number
Example:
1234: [
10] > [ 10] > [ 10] > [1] > [2] >
[3] > [4]
[CLEAR]: Clear the entered value.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SCC500EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SCC500EB in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SCC500EB

Technics SCC500EB User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info