612604
4
Zoom out
Zoom in
Previous page
1/20
Next page
ENGLISH
ESPAÑOL FRANÇAIS
SVENSKA
RQT5561
4
Speaker set-up
A
Attach the rubber feet to the speaker
The 3 speakers are the same.
The 3 speakers can be set-up either standing or lying down. Attach
these rubber feet to prevent vibration causing the speakers to move
or fall over.
One sheet of 12 rubber feet is included. Use 3 or 4 feet per speaker.
Attaching to the wall
a Rubber feet (included)
b Screw (not included)
B To attach vertically
C To attach horizontally
Attach four rubber feet to each speaker, ensuring they do not cover
the holes.
Note
The surface you attach the speakers to must be able to support over
10 kg.
D
Attaching to speaker stands
c Speaker stands (not included)
d Plate thickness +7 to 10 mm
e Attach the stands with these holes.
Note
Ensure the following conditions are met when you purchase your
speaker stands.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between the centers of the holes: 60 mm
The stands must be able to support over 10 kg.
The stands must be stable even if the speakers are in a high posi-
tion.
Moving the brand badge
You can rotate the brand badge if you choose to set up the speakers
horizontally.
Rotate the badge to the required position.
Instalación de altavoces
A
Colocación de las patas de goma en los altavoces
Los 3 altavoces son idénticos.
Los 3 altavoces pueden instalarse en posición horizontal o vertical.
Coloque estas patas de goma para impedir la vibración que puede
ser la causa de que los altavoces se muevan o caigan.
Se incluye una hoja de 12 patas de goma. Utilice 3 ó 4 patas por
altavoz.
Colocación en una pared
a Patas de goma (incluidas)
b Tornillo (opcional)
B Para colocarlos verticalmente
C Para colocarlos horizontalmente
Coloque las cuatro patas de goma en cada altavoz asegurándose
de que no tapen los agujeros.
Nota
La superficie en la que coloque los altavoces deberá ser capaz de
aguantar un peso superior a 10 kg.
D
Colocación en soportes de altavoces
c Soportes de altavoces (opcional)
d Grosor de la placa: +7 a 10 mm
e Coloque los soportes con estos agujeros.
Nota
Asegúrese de cumplir las condiciones siguientes cuando
adquiera sus soportes de altavoces.
Tenga en cuenta el diámetro y la longitud de los tornillos, y a la
distancia entre los tornillos, como se muestra en el diagrama.
Diámetro del tornillo: 5 mm, paso: 0,8 mm, longitud: entre 7 y 10 mm
(grosor del soporte más el de la chapa)
Distancia entre los centros de los agujeros: 60 mm
Los soportes deben ser capaces de aguantar más de 10 kg.
Los soportes deben ser estables aunque los altavoces se coloquen
en una posición alta.
Movimiento de la placa de la marca
Podrá girar la placa de la marca si así lo elige para poner los altavoces
en posición horizontal.
Gire la placa a la posición deseada.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SBCSS140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SBCSS140 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info