536240
18
Zoom out
Zoom in
Previous page
1/124
Next page
En-18
Pairing with Bluetooth enabled devices
1
Press the button to turn the power on.
2
Press the INPUT button to select Bluetooth function.
3
Press the PAIRING button.
•
The PAIRING indicator flashes. The sound bar is now in pairing mode and is ready to be paired
with other Bluetooth source device.
•
Pairing can be made regardless of the current input source.
4
Perform pairing procedure on the source device to detect the sound bar.
•
Refer to the instruction manual of the source device for details.
•
"Onkyo SBT-200” will appear in the detected devices list (if available) in the source device.
•
Place the devices to be paired within 1 meter of each other when pairing.
•
Some source devices are unable to display lists of detected devices. To pair this sound bar with
the source device, refer to the instruction manual of the source device for details.
5
Select "Onkyo SBT-200” from the source list. If passcode* is required, enter “0000”.
•
Pairing indicator (blue) on the sound bar will stop flashing once the sound bar is successfully
paired with the source device. Pairing information is now memorized in the sound bar.
* Passcode may be called PIN Code, Passkey, PIN number or Password.
6
Start the Bluetooth connection from the source device.
•
Some audio source devices may connect with the sound bar automatically, otherwise follow the
instructions in the instruction manual of the source device to start connection.
Note
•
If the sound bar or the source device is turned off before Bluetooth connection is completed, pairing
will not be completed and the pairing information will not be memorized. Repeat step 1 to start
pairing again.
•
To pair with other devices, repeat steps 1 - 5 for each device.
•
Once a device is ousted or deleted from the pairing list, the pairing information for the device is also
deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to
pair the device again.
•
Passcode of this sound bar is fixed to “0000” and can only be paired with Bluetooth source device
whose passcode is also “0000”.
Pairing with Bluetooth enabled devices using NFC
•
On an NFC enabled device, Bluetooth pairing can be made only by holding the device over the sound
bar.
•
Check that the NFC function on the device is “ON”.
1
Turn on the sound bar and the device.
2
Start an app for reading NFC on the device.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SB-T200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SB-T200 in the language / languages: German, Italian, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SB-T200

Technics SB-T200 User Manual - English, French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info