536236

Technics SA-DA10 Manual

51
Zoom out
Zoom in
Previous page
1/52
Next page
51
RQT5518
Unit doesn’t come on.
Sound is not heard.
Sound suddenly stops or
none is heard when the
unit is switched on.
“OVERLOAD” appears on
the display.
The AC mains lead plug is not fully inserted.
The speaker indicators are off.
The muting function is on.
Incomplete or incorrect connection to
speakers and external equipment.
The incorrect input source has been
selected.
The protection circuitry has functioned
because: the positive and negative speaker
wires have shorted; speakers with a lower
impedance than this unit’s rated impedance
are being used; the speakers are under
strain through excessive volume, excessive
power, or by being used in a high
temperature environment.
¡Confirm the plug is fully inserted.
¡Turn on the speaker indicators.
¡Press the muting button on the remote
control.
¡Check all connections.
¡Select the correct source.
¡Switch off the unit, determine and correct
the cause, then switch the unit on.
¡Use speakers with the right impedance
rating.
Common Problems
The tape monitor function is on. ¡Press the tape monitor button.
“F70” appears on the
display.
¡Turn off the unit and then turn it on again,
or disconnect the AC mains lead and then
connect it to your household mains socket
again.
(If “F70” remains on the display, consult an
authorized service center or your dealer.)
Problem Probable cause(s) Suggested remedy Page(s)
–
22
24
37
22
10–16
–
14–16
–
Cannot play CD, DVD, or
TV.
The DIGITAL input mode is set to DIGITAL
or ANALOG.
22¡Change the setting to suit the type of
connection you have made.
Digital signals this unit cannot decode are
being played.
¡Either have the player convert the signals
so this unit can handle them or switch to
ANALOG input.
22, 23
Nothing appears on the
display.
VGCA is ON. 27¡Nothing appears on the display while
VGCA is on. To turn the display on, press
and hold [VGCA].
The display is dim. The dimmer is on. 37¡Press [DIMMER] to restore the display to
normal.
The picture doesn’t appear
on the television.
Connection is incorrect. 10, 11¡Check and correct connections.
The television’s input mode is incorrect. –¡Change the input mode to suit the
connections between this unit and the
television.
Reference
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a
soap-and-water solution or a weak detergent solution.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
MaintenanceThe RESET function
While the unit is on
While pressing and holding [DIGITAL
INPUT], press and hold [ /l] until
“RESET” appears on the display.
The operation settings for the unit will be initialized to the settings
made at the time of shipment.
However, any preset radio stations will not be erased.
DIGITAL INPUT
… 51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SA-DA10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SA-DA10 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SA-DA10

Technics SA-DA10 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info