3
General information
These hearing impaired TV headphone is specially designed to help
people with a hearing impairment to hear sounds from the TV (or
another audio device) clearly and without distortion, which is not
always possible with a normal hearing aid, or with an ordinary
wireless headphone. They can also be used as normal wireless
headphones, when you do not want to disturb others while watching
TV. In order to keep the perfect sound quality, please pay attention
to the following situation: Away from another electronics device, for
example: micro-wave oven, and another communication device e.g.
telephone. Do not activate more electronic equipments in the near
area at the same time. It can happen lost of sound quality &
interference
There are three different ways to connect the TX-99 to a TV or
another sound source (e.g. computer or HiFi system). The ways
are:
⚫ the headphone socket,
⚫ the Audio out L/R socket or
⚫ the included microphone.
Make sure your TV has an audio output. Not all connections on the
TV are outputs. TVs are playback devices and mainly have inputs. A
headphone jack on the TV is an audio output and can be connected
to the TX-99.
If you do not know which port to use, please refer to the instruction
manual of your TV.
The transmitter switches to standby mode after 5 minutes without
input signal at the Audio-IN. As soon as a signal is applied to the
audio-IN, it takes about 3-5 seconds until the music can be heard
again via the receiver.
