795987
44
Zoom out
Zoom in
Previous page
1/88
Next page
44
Click setup button. Set motion detection regions here. There are four regions for you to
set (red, yellow, blue and green). Select one of the colored regions first. Then click the
left mouse button on the start point of the area you want to select and drag the mouse
to select the area. In the test area the best setting for sensitivity and threshold is 60 and
10 respectively. Depending on your given environment this settings can be vary.
Sensitivity and threshold can be set in the range from 0 to 100. The higher the
sensitivity and the lower the threshold are set the more motion is detected. For example:
When a leaf falls or a cat is running in the selected area a motion will be detected.
In this case a subjective setting by the customer is requested!
The corresponding colored area displays different detection areas. After you completed
the setup remember to click the save button to save current setup. If you click ESC
button to exit the region setup interface system will not save your zone setup.
Record: Check the Box here, system auto activates motion detection channel(s) to
record once an alarm occurs.
Record Delay: System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Send email: Check the Box here, system can send out email to alert you when an alarm
occurs.
PTZ (Only TX-67): Check the Box here, to set PTZ movement here when an alarm
occurs. Such as go to preset, tour & pattern when there is an alarm.
Snapshot: Enable this function to snapshot image when a motion detect alarm occurs.
For detail information refer the help file.
B: Video Tamper
You need to check the box here to realize the video tamper alarm.
Enable: Check the box here to enable video tamper function.
Working Period: Check the box here and click the setup button. Set motion detect period
here. System only enables motion detect operation in the specified periods. It is not for
video loss or the tampering. There are two ways for you to set periods. Note system
only supports 6 periods in one day. Select the period you want to set with the mouse.
With the “Setup” button select the working period for the day. Check “All” for the whole
week. For each period set the start time and the end time. Save the settings after
changing.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TX-66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-66 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx TX-66

Technaxx TX-66 User Manual - German - 88 pages

Technaxx TX-66 User Manual - Spanish - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info