795987
17
Zoom out
Zoom in
Previous page
1/88
Next page
17
Step 3: Aim the three slots on the dome body to the three corresponding snaps on the
installation pedestal and then push up slowly until you hear it “click”
Step4: Take out the fastening screw from the accessories bag and screw it (in Figure 3-7)
into the corresponding threaded holes of the dome body to tighten the installation pedestal
and prevent falling. The fastening screw of vandal-proof dome is M2.5*7 hexagon socket
head stainless screw while the fastening screw of non vandal-proof dome is cross recess
self-tapping screw, refer to the actual object in the accessories bag.
Note: The device supports bottom cable exit and side cable exit; refer to the following
Figure 3-8 for side cable exit.
Figure 3-8
Restore Factory Default Setup Introduction
Important: Use RESET button when device is running. See Figure 3-9 for the location of
RESET button, which is the same for both vandal-proof dome and non vandal-proof dome.
Step 1: Use inner hex wrench in the accessories bag to open dome enclosure by
unfastening three inner hex screws on enclosure.
Step 2: Figure 3-9 shows the position of the Reset button.
Step 3: To reset the device press and hold the Reset button for about 30 seconds.
Step 4: Install the dome back to quick installation pedestal
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TX-66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-66 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx TX-66

Technaxx TX-66 User Manual - German - 88 pages

Technaxx TX-66 User Manual - Spanish - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info