795987
13
Zoom out
Zoom in
Previous page
1/88
Next page
13
Step 1: Use inner hex wrench in the accessories bag to open dome enclosure by
unfastening three inner hex screws on enclosure.
Step 2: Take out the installation position map in the accessories bag, and then paste it on
the ceiling or the wall according to your monitor area requirements.
Step 3: Find cross signs on the map, and dig three plastic expansion bolts holes on the
installation surface and then insert three expansion bolts in the holes. Secure these three
bolts firmly.
Note:
If user pulls out cable from top of installation surface, you must dig an exit hole on
installation surface according to the installation position map.
If user pulls out cable from side of cable channel, it must go through the U-shape
channel on dome pedestal, and take out cable from the side exit hole on pedestal.
Step 4: Adjust the device installation pedestal to the proper position and then pull cable
through the exit hole on Installation surface. Make direction of TOP sign same as it on
installation position map. Line up the three screw holes in the device pedestal to the three
plastic expansion bolt holes in the installation position. Put the three self-tapping screws in
the three plastic expansion bolts firmly. Fix dome body on installation surface.
Step 5:
a) Hold both sides of the rotation bracket bottom with hands, rotate the bracket horizontally,
and adjust lens horizontal direction to designated position. Loosen one M2 screw on
fixed LED decoration cover (loosen only, do not take it down), hold the decoration cover
with hand, making lens rotate vertically. Adjust vertical direction of lens monitoring
image to appropriate angle, and fasten the fix screw on the decoration cover. Range of
lens: vertical (0°+65°), horizontal (0°+355°).
b) Hold both sides of the rotation bracket bottom with hands, rotate horizontally along the
axis, and adjust lens horizontal direction to designated position. Hold the LED
decoration cover with hand, rotate along the vertical direction, adjust the lens vertical
direction to designated position; it is okay to loosen the fix screws on both sides of the
bracket first if it is too tight to adjust (just make it loose, do not take it down), then adjust
the lens, tighten the fix screws after adjustment. Hold the LED decoration cover with
hands, rotate horizontally along the axis, and adjust the lens image to designated
position. Range of lens: vertical (0°+64°), horizontal (0°+355°), image rotation
direction (0°+355°).
Note:
When it rotates to 64° vertically, pay attention to the image rotation direction in order to
avoid the outer cover blocking IR light and influencing IR effect.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TX-66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-66 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx TX-66

Technaxx TX-66 User Manual - German - 88 pages

Technaxx TX-66 User Manual - Spanish - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info