Manual Technaxx TX-60 - IP-cam (page 64 of 72) (English)

795993

Zoom out

Zoom in

1/72

6.1.5 Subnet does not match

Check whether your ipcamera in the same subnet of your computer. The step is Control Panel  Network

Connections  Dbclick Local Area Connections  Choose General  Properties.(Figure 3.23/3.24)

Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the

same subnet. Otherwise you can't access camera.

6.1.6 No Pictures Problems

The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you

will see no video image. You can resolve this problem by this way: Download ActiveX controller and set the

safety property of IE in the PC when you view it first time: IE browser  Tool  Internet Proper  Security 

Custom Level  ActiveX control and Plug-ins. Three options of front should be set to be “Enable”, The ActiveX

programs read by the computer will be stored. As follows:

Enable: Download unsigned ActiveX controls

Enable: Initialize and script ActiveX controls not marked as safe

Enable: Run ActiveX controls and plug-ins

Figure 6.6

If you allow the ActiveX running, but still could not see living video. Please change another port number to try.

Do not use port 88.

Figure6.7

NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could

not see video, please shut down firewall or anti-virus software to try again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-60 - IP-cam in the language / languages: English as an attachment in your email.

The manual is 4.06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technaxx TX-60 - IP-cam Manual

Product: